Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Foamy end pour
By:Danny Cox
Date: 11/22/2003, 8:21 pm
In Response To: Epoxy: Foamy end pour (pikabike)

Yes, epoxy gets quite warm and will foam. Some folks set the end poor into a warm bath to help speed the set time of the epoxy. The foam is cosmetic and will not hurt.

Danny

Messages In This Thread

Epoxy: Foamy end pour
pikabike -- 11/22/2003, 8:02 pm
Re: Epoxy: Foamy end pour
Mike and Rikki -- 11/23/2003, 1:14 pm
Re: Epoxy: Foamy end pour
Robert N Pruden -- 11/24/2003, 11:28 am
Re: Epoxy: Foamy end pour
pikabike -- 11/23/2003, 3:02 pm
Re: Epoxy: Foamy end pour
Chuck -- 11/23/2003, 3:52 pm
Re: Boats that are not straight
pikabike -- 11/23/2003, 11:26 pm
Re: Boats that are not straight
Robert N Pruden -- 11/29/2003, 5:14 pm
Dito *NM*
Danny Cox -- 11/23/2003, 5:30 pm
Re: Epoxy: Foamy end pour *LINK*
Steve Pituch -- 11/22/2003, 9:19 pm
Re: Epoxy: Foamy end pour
Danny Cox -- 11/22/2003, 8:21 pm
Re: Epoxy: Foamy end pour
pikabike -- 11/22/2003, 8:31 pm
Re: Epoxy: Foamy end pour
Robert N Pruden -- 11/22/2003, 11:49 pm
Re: Epoxy: Foamy end pour
Don Beale -- 11/22/2003, 9:10 pm