Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Deck is already built and joined to hull
By:pikabike
Date: 12/4/2003, 3:49 pm
In Response To: Cut with knife (Rod Tait)

: If I understand correctly, you want to know how to cut the cloth before you
: build your deck.

No, the hull and deck are already joined. I was wondering if it was possible to cut the resin-soaked overhanging cloth so it was exactly flush with the hull/deck edge.

Messages In This Thread

Other: Trimming @ shearline after glassing the hull
pikabike -- 12/3/2003, 11:37 pm
Re: Other: Razor Blade and Spokeshave
Chip Sandresky -- 12/4/2003, 2:09 pm
Re: Ack!
pikabike -- 12/4/2003, 3:58 pm
Cut with knife
Rod Tait -- 12/4/2003, 2:09 am
Re: Deck is already built and joined to hull
pikabike -- 12/4/2003, 3:49 pm
Re: Cut with knife
Mike Scarborough -- 12/4/2003, 9:44 am
Re: Other: Trimming @ shearline after glassing the
Paul G. Jacobson -- 12/4/2003, 12:27 am
Re: Other: Trimming @ shearline after glassing the
LeeG -- 12/3/2003, 11:56 pm