Re: Ack!
By:pikabike
Date: 12/4/2003, 3:58 pm
Date: 12/4/2003, 3:58 pm
In Response To: Re: Other: Razor Blade and Spokeshave (Chip Sandresky)
: I usually hold the floppy side of the fabric in one hand and run a razor
: blade along the edge with the other hand. It is sometimes hard to cut
: through the bead of epoxy that tends to form at the edge. A round sole
: spokeshave will zip off the excess lumps with little effort.
Now I know why so many people build several boats: they are justifying the cost and time spent buying/making special tools!
Seriously, your stated technique is exactly the kind of answer I was looking for.
Messages In This Thread
- Other: Trimming @ shearline after glassing the hull
pikabike -- 12/3/2003, 11:37 pm- Re: Other: Razor Blade and Spokeshave
Chip Sandresky -- 12/4/2003, 2:09 pm- Re: Ack!
pikabike -- 12/4/2003, 3:58 pm
- Cut with knife
Rod Tait -- 12/4/2003, 2:09 am- Re: Deck is already built and joined to hull
pikabike -- 12/4/2003, 3:49 pm- Re: Cut with knife
Mike Scarborough -- 12/4/2003, 9:44 am - Re: Cut with knife
- Re: Other: Trimming @ shearline after glassing the
Paul G. Jacobson -- 12/4/2003, 12:27 am- Re: Other: Trimming @ shearline after glassing the
LeeG -- 12/3/2003, 11:56 pm - Re: Ack!
- Re: Other: Razor Blade and Spokeshave