Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: wet out with MAS, filled with Sys 3...b
By:hoz
Date: 12/6/2003, 9:24 am
In Response To: Epoxy: wet out with MAS, filled with Sys 3...bad mix. (Bill Cruz)

I have mixed MAS, West and Raka with no bad results. I would suspect either an inaccurate mix ratio, the cold temps, or a combination. Too bad you had problems.

BTW, One Ocean kayaks test pages also state he has had no problems using different resins during the process.

Messages In This Thread

Epoxy: wet out with MAS, filled with Sys 3...bad mix.
Bill Cruz -- 12/5/2003, 10:45 pm
Re: Epoxy: wet out with MAS, filled with Sys 3...b
hoz -- 12/6/2003, 9:24 am
Re: Epoxy: wet out with MAS, filled with Sys 3...b
Bill Cruz -- 12/7/2003, 2:40 pm
Re: Epoxy: wet out with MAS, filled with Sys 3...b
hoz -- 12/7/2003, 5:10 pm
Just curious,
Bill Cruz -- 12/8/2003, 1:38 am
Re: Just curious,
hoz -- 12/8/2003, 6:33 am
"Mr. Hoz,"
Bill Cruz -- 12/8/2003, 3:40 pm
Re: Epoxy: wet out with MAS, filled with Sys 3...b
Chuck -- 12/5/2003, 11:03 pm
Two brands of Epoxy...same project?
Bill Cruz -- 12/6/2003, 9:25 am
Well, maybe.
Paul G. Jacobson -- 12/5/2003, 11:45 pm