Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Just curious,
By:Bill Cruz
Date: 12/8/2003, 1:38 am
Date: 12/8/2003, 1:38 am
In Response To: Re: Epoxy: wet out with MAS, filled with Sys 3...b (hoz)
: Sorry for the confusion. I didn't mix resins from one company with hardeners
: from another. Just used MAS for the wet out and West or Raka for the fill.
Hoz, did you allow the wet out to set up completely before you applied the fill?...Or almost completely? In my case, I was "rushing" to get a fill coat in and I didn't wait for the wet out to set up completely...
Bill
Messages In This Thread
- Epoxy: wet out with MAS, filled with Sys 3...bad mix.
Bill Cruz -- 12/5/2003, 10:45 pm- Re: Epoxy: wet out with MAS, filled with Sys 3...b
hoz -- 12/6/2003, 9:24 am- Re: Epoxy: wet out with MAS, filled with Sys 3...b
Bill Cruz -- 12/7/2003, 2:40 pm- Re: Epoxy: wet out with MAS, filled with Sys 3...b
hoz -- 12/7/2003, 5:10 pm- Just curious,
Bill Cruz -- 12/8/2003, 1:38 am- Re: Just curious,
hoz -- 12/8/2003, 6:33 am- "Mr. Hoz,"
Bill Cruz -- 12/8/2003, 3:40 pm
- "Mr. Hoz,"
- Re: Just curious,
- Just curious,
- Re: Epoxy: wet out with MAS, filled with Sys 3...b
- Re: Epoxy: wet out with MAS, filled with Sys 3...b
Chuck -- 12/5/2003, 11:03 pm- Two brands of Epoxy...same project?
Bill Cruz -- 12/6/2003, 9:25 am- Well, maybe.
Paul G. Jacobson -- 12/5/2003, 11:45 pm - Well, maybe.
- Re: Epoxy: wet out with MAS, filled with Sys 3...b
- Re: Epoxy: wet out with MAS, filled with Sys 3...b
