Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Among the Unwashed
By:David Humphries
Date: 12/18/2003, 4:27 pm
In Response To: Re: Epoxy: Among the Unwashed (chuck)

: And one other thing, you will find a carbide scraper is the best tool for smoothing and blending the edge where you have a double layer of glass whether the epoxy is green or cured, rather than sanding
David

Messages In This Thread

Epoxy: Sanding before the fill coat
pikabike -- 12/18/2003, 2:12 pm
Re: Epoxy: Sanding before the fill coat
Don -- 12/18/2003, 5:03 pm
Re: Epoxy: Sanding before the fill coat *LINK*
srchr/gerald -- 12/18/2003, 4:45 pm
Re: Epoxy: Among the Unwashed
C. Fronzek -- 12/18/2003, 3:47 pm
Re: Epoxy: Among the Unwashed
chuck -- 12/18/2003, 4:23 pm
Re: Time has decided for me
pikabike -- 12/19/2003, 1:17 am
Re: Epoxy: Among the Unwashed
C. Fronzek -- 12/18/2003, 4:46 pm
Re: Epoxy: Among the Unwashed
Ed Gutgesell -- 12/19/2003, 9:50 am
Re: Epoxy: Blush vs. Amin Blush
C. Fronzek -- 12/19/2003, 11:16 am
Re: Epoxy: Blush vs. Amin Blush
Ed Gutgesell -- 12/22/2003, 9:50 am
Re: Epoxy: Among the Unwashed
David Humphries -- 12/18/2003, 4:27 pm
Re: Epoxy: Sanding before the fill coat
LeeG -- 12/18/2003, 2:21 pm
Re: But, but, but...
pikabike -- 12/18/2003, 2:37 pm
Re: But, but, but...
Rod Tait -- 12/18/2003, 3:39 pm
Re: But, but, but...
Paul Probus -- 12/18/2003, 3:02 pm
Re: But, but, but...Mechanical bond is better
bryan gorr -- 12/18/2003, 3:13 pm
Re: Peeling off
pikabike -- 12/19/2003, 1:48 am
Re: But, but, but...Mechanical bond is better
Dave Houser -- 12/18/2003, 3:36 pm