Hey everyone, Paul G.,ChrisO, srchr/gerald,Chip Sandresky

Thanks for taking the time to respond, there are some great tip's there,
#1. I knew fish Eye's were from a dirty surface, But never thought about using a de-greacer, the surface looked clean "Duh" and FYI when I put the resin on all the previous resin was sanded off.
#2. Ill make sure all the plastic buckes are de greaced as well (good tip)
#3 Ill look at other Epoxy's when im finished with this project,
#4 Ill get a good Spray on Varnish (if you have a brand name that you can sugest that would be great)
#5 The Mirrors are inside (warm) but I will put them near a light bulb so they can dry faster.
#6 how much of the Epoxyed surface will I need to sand down/off to apply a varnish coat, What Im asking is will the varnish fill the fish eye's at all, The reason I ask is the resin that I put on is not very thick, I didn't want to wait for ever for it to dry so I layed it on thin. And I dont want to sand threw the Epoxy trying to remove fish eye's
#7 should I sand down the resin smooth remove al the fish eyes and re- resin?