: #6 how much of the Epoxyed surface will I need to sand down/off to apply a
: varnish coat, What Im asking is will the varnish fill the fish eye's at
: all, The reason I ask is the resin that I put on is not very thick, I
: didn't want to wait for ever for it to dry so I layed it on thin. And I
: dont want to sand threw the Epoxy trying to remove fish eye's
: #7 should I sand down the resin smooth remove al the fish eyes and re- resin?

Varnish will not fill depressions in the epoxy surface. You would end up with the same "shape" of surface you started out with.

You need to do a light sanding anyway before varnishing -- if that doesn't eliminate the fisheyes, then you have a choice. Accept them, or keep going until the fisheyes are gone. Then rinse away all sanding dust, apply another thin coat of epoxy, do another light sanding (just enough to rough up the surface), and varnish away.