Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: 2x4 > 6
By:LeeG
Date: 12/29/2003, 4:45 pm
In Response To: Re: Material: 2x4 > 6 (LeeG)

that's weird,,,the rest of the paragraph didn't come out,,
anyway mostly it appeared that s-glass wasn't as brittle but I don't know how much variations in plywood humidity or presealing might have to do with it. The crack in the 6oz sides and 10oz bottom of the Ch18 were

Messages In This Thread

Material: 2x4 > 6
Randy Knauff -- 12/28/2003, 3:56 pm
Re: Material: 2x4 > 6
srchr/gerald -- 12/28/2003, 10:38 pm
Re: Material: 2x4 > 6
Ron -- 12/29/2003, 11:39 pm
Re: Material: 4/6 or 6/4
Randy Knauff -- 12/29/2003, 4:47 pm
Re: Material: 4/6 or 6/4
srchr/gerald -- 12/29/2003, 7:18 pm
Re: Material: 4/6 or 6/4
Sam McFadden -- 12/29/2003, 7:10 pm
Re: Material: 4/6 or 6/4
LeeG -- 12/29/2003, 5:29 pm
Re: Material: 2x4 > 6
Sam McFadden -- 12/28/2003, 7:40 pm
Re: Material: 2x4 > 6
Randy Knauff -- 12/28/2003, 8:10 pm
Re: Material: 2x4 > 6
Sam McFadden -- 12/29/2003, 12:10 pm
Re: Material: 2x4 > 6
LeeG -- 12/29/2003, 12:34 pm
Re: Material: 2x4 > 6
Sam McFadden -- 12/29/2003, 3:12 pm
Re: Material: 2x4 > 6
LeeG -- 12/29/2003, 4:31 pm
Re: Material: 2x4 > 6
LeeG -- 12/29/2003, 4:36 pm
Re: Material: 2x4 > 6
LeeG -- 12/29/2003, 4:45 pm
Thanks *NM*
Sam McFadden -- 12/29/2003, 7:11 pm
Re: Material: 2x4 > 6
LeeG -- 12/28/2003, 11:19 pm
Re: Material: 2x4 > 6
Chuck in Pa -- 12/28/2003, 10:17 pm
Re: Material: 2x4 > 6
LeeG -- 12/28/2003, 11:08 pm
Re: Material: 2x4 > 6 *LINK*
Richard Kohlström -- 12/28/2003, 7:39 pm