Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Epoxy Aluminum Sailboat Mast?
By:Bill Hamm
Date: 2/27/2008, 4:21 am
In Response To: Re: Epoxy: Epoxy Aluminum Sailboat Mast? (John Monroe)

: That's a little scary for me. However I have found that the thin Diabloe
: circular blade that some of us use to cut wood strips also cuts really
: good on aluminum. I have cut 1/4 inch thick aluminum with no problems. But
: wear goggles.

: Another way of locking the tubing together would be to make a round piece of
: soft wood that would slide into the smaller tube for support, maybe an
: inch long, then take a center punch and punch the walls of the tube into
: one another in a few places locking the tubes together, then drive the
: soft wood out of the tube. The aluminum tubing would be driven part way
: into the soft wood but the wood could be pushed out of the tubing. The
: wood would also keep the tubing supported and round while center punching
: it. I like this idea but I can't do it now since I have the smaller tubes
: filled with foam. The epoxy idea should be fine I think.

: John

Don't use wood for tubing inserts. Works for awile then the wood expands as it absorbs moisture and will rupture the tubing.

Bill H.

Messages In This Thread

Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/24/2008, 3:02 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Acors -- 2/25/2008, 10:49 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:59 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:48 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/28/2008, 5:15 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/28/2008, 6:48 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/29/2008, 3:30 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/1/2008, 2:25 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 2:22 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/2/2008, 3:58 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/11/2008, 1:39 am
Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am
Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:19 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/3/2008, 4:00 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/4/2008, 1:00 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:20 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:21 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Scarborough -- 2/25/2008, 12:26 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:09 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:30 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:06 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:19 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:25 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:08 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/25/2008, 1:48 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Savage -- 2/24/2008, 7:26 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Michael McCluskey -- 2/24/2008, 6:54 am