Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
By:John Monroe
Date: 2/28/2008, 5:15 am
In Response To: Re: Epoxy: Epoxy Aluminum Sailboat Mast? (John Monroe)

Bill thanks for taking a look at this. I'm no mathematician.

The mast sizes are in the picture. The ama beam is 11 1/2 feet, the ama's length is 36 inches, the circumference in the middle is 34" and they are shaped like a banana. I have foam in most of the tubing for floatation and maybe some extra strength in the aka’s and the mast.

One minor problem, I tried to stay safe when epoxying but I must have push epoxy in front of the insert tubes so the inserts only go in about 14 inches instead of 18 inches. If I can't chip or sand off the extra epoxy way back inside the tubes I will have to cut off 4 inches of insert tubing. The plans of mice and men and Murphy’s Law were at work.

John

Messages In This Thread

Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/24/2008, 3:02 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Acors -- 2/25/2008, 10:49 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:59 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:48 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/28/2008, 5:15 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/28/2008, 6:48 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/29/2008, 3:30 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/1/2008, 2:25 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 2:22 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/2/2008, 3:58 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/11/2008, 1:39 am
Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am
Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:19 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/3/2008, 4:00 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/4/2008, 1:00 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:20 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:21 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Scarborough -- 2/25/2008, 12:26 pm
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:09 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:30 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:06 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:19 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:25 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:08 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/25/2008, 1:48 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Savage -- 2/24/2008, 7:26 am
Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Michael McCluskey -- 2/24/2008, 6:54 am