Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: more on scarph joints
By:dave
Date: 2/28/2008, 8:47 pm
In Response To: more on scarph joints (Paul G. Jacobson)

Hmmm,

Seems to me, when I asked about this, everyone kept saying not to bother with staggering the joints, that "the glue is stronger than the wood", or something, but this discussion is about strips and mine was about panels...

But, butt joints were given the ok earlier as well though...

anyway, lofting and maybe scarfing my panels is finally where I'm at in my build...I'll get there.

: Oh, and why do you just need 6 or 7 full-length strips? Because it is much
: faster to work with simple butt joints and shorter strips once you get
: started with full length strips on the keel line, top edge of the hull, or
: waterline. After that you just stagger the joints, kinda like you would
: build a brick wall by staggering the joint lines, but with really long
: bricks. You don't need any kind of blocking behind the joint, as the
: strips on either side reinforce these joints.

Messages In This Thread

Strip: Which way to scarf?
Darren -- 2/18/2008, 5:23 am
Re: Strip: Which way to scarf?
Etienne Muller - Ireland -- 2/29/2008, 6:40 am
Re: Strip: Which way to scarf?
Darren -- 3/2/2008, 5:36 pm
Re: Strip: Which way to scarf?
Allan -- 3/2/2008, 7:49 pm
Huon pine; add King Billy pine *NM*
JohnK -- 2/29/2008, 4:58 pm
Re: Strip: Which way to scarf?
Robert N Pruden -- 2/22/2008, 12:19 am
Re: Strip: Which way to scarf?
Bill Hamm -- 2/22/2008, 10:17 am
Re: Strip: Which way to scarf?
Robert N Pruden -- 2/22/2008, 5:39 pm
Re: Strip: Which way to scarf?
Darren -- 2/23/2008, 5:02 am
Direction for scarph joint, part 2 of 2 *Pic*
Paul G. Jacobson -- 2/26/2008, 10:34 pm
Great graphics as always Paul. *NM*
John Monroe -- 3/2/2008, 3:41 am
Re: Direction for scarph joint, part 2 of 2
Darren -- 2/27/2008, 5:19 pm
more on scarph joints
Paul G. Jacobson -- 2/28/2008, 7:31 pm
Re: more on scarph joints
Bill Hamm -- 3/2/2008, 2:16 am
Re: more on scarph joints
dave -- 2/28/2008, 8:47 pm
Cover your butt with a scarf at my joint ! *Pic*
Paul G. Jacobson -- 3/6/2008, 8:23 pm
Re: Cover your butt with a scarf at my joint !
John Monroe -- 3/7/2008, 2:59 am
Directon for scarph joint. Part 1 of 2 *Pic*
Paul G. Jacobson -- 2/26/2008, 10:32 pm
Re: Strip: Which way to scarf?
Charlie -- 2/19/2008, 2:42 pm
Re: Strip: Which way to scarf?
Bill Hamm -- 2/20/2008, 1:54 am
Scar cutting jig *LINK*
Jay Babina -- 2/19/2008, 8:46 am
Re: Scar cutting jig
Kudzu -- 2/19/2008, 9:30 am
Re: Strip: Which way to scarf?
Bill Hamm -- 2/19/2008, 2:14 am
Re: Strip: Which way to scarf?
Rob Macks / Laughing Loon CC&K -- 2/19/2008, 10:32 am
Re: Strip: Which way to scarf?
Bill Hamm -- 2/20/2008, 2:16 am
C & B or flat edge? *LINK*
Jay Babina -- 2/20/2008, 8:38 am
Re: Strip: Which way to scarf?
Bill Hamm -- 2/20/2008, 1:48 am
Re: Strip: Which way to scarf?
Rob Macks / Laughing Loon CC&K -- 2/20/2008, 12:46 pm
Re: Strip: Which way to scarf?
Tim -- 2/18/2008, 12:30 pm
Re: Strip: Which way to scarf?
Steve Rasmussen -- 2/18/2008, 11:20 am
Scarf cut *LINK*
Jay Babina -- 2/18/2008, 8:06 am
Re: Scarf cut
Bill Hamm -- 2/19/2008, 2:18 am
Re: Scarf cut
Jay Babina -- 2/19/2008, 8:54 am
Re: Scarf cut
Bill Hamm -- 2/20/2008, 1:44 am