Date: 3/11/2008, 2:44 am
Hi Bill,
I'm running out of space for my books also.
Thanks Bill for looking at the mast strength. The mast is working out OK now but I had some problems. I had epoxy run out into my third section larger tube while fastening the inner tube to the outside tube, which blocked the insertion from sliding all the way in. I chiseled and sanded the epoxy obstructions then blew out the inside tube and also vacuumed it but the third section was binding. I couldn't figure it out but then I decided to wash it out with water and it worked just fine. I was getting sanding grit that I couldn't see or blow / vacuum out. That was a good lesson for when I get around sand and water. We are getting a weather break now and I can fly into the project and maybe launch in a month or so. Still lots to do including sewing a sail bag and a mast, aka, ama, tiller bag.
John M
Messages In This Thread
- Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/24/2008, 3:02 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Acors -- 2/25/2008, 10:49 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:59 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:48 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast? *Pic*
John Monroe -- 2/28/2008, 5:15 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/28/2008, 6:48 pm- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/29/2008, 3:30 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/1/2008, 2:25 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 2:22 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/2/2008, 3:58 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/11/2008, 1:39 am- Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am- Epoxy Aluminum Sailboat Mast? Update. *Pic*
John Monroe -- 3/11/2008, 2:44 am - Epoxy Aluminum Sailboat Mast? Update. *Pic*
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:19 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 3/3/2008, 4:00 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/4/2008, 1:00 am
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 3/2/2008, 4:20 am - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Epoxy Aluminum Sailboat Mast? Update. *Pic*
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/29/2008, 4:06 pm - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:21 am - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Scarborough -- 2/25/2008, 12:26 pm - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:09 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:30 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/26/2008, 5:06 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/27/2008, 4:19 am
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/26/2008, 2:25 am - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
John Monroe -- 2/25/2008, 3:08 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Bill Hamm -- 2/25/2008, 1:48 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Mike Savage -- 2/24/2008, 7:26 am- Re: Epoxy: Epoxy Aluminum Sailboat Mast?
Michael McCluskey -- 2/24/2008, 6:54 am - Re: Epoxy: Epoxy Aluminum Sailboat Mast?
- Re: Epoxy: Epoxy Aluminum Sailboat Mast?