Re: Epoxy: Ratios by weight
In Response To: Epoxy: Ratios by weight (Will N)
A comment about ratios:
Be sure to use the ratio printed on the hardener can. As an example, West System 207 hardener is advertised as a 3 to 1 ratio mix. However, on the can of 207 hardener it states: 3.3 to 1 ratio by volume and 3.7 to 1 ratio by weight.
Note that if you purchase West System resin and hardener in the U.K. and possibly Europe the ratios are different. West System products are made by another company, Wessex Resins I believe, for the U.K. and possibly European market. Just something to be aware of.
Glen in Baie-St-Paul.
Messages In This Thread
- Epoxy: Ratios by weight
Will N -- 3/22/2008, 6:09 pm- Re: Epoxy: Ratios by weight *LINK* *Pic*
John D. -- 3/23/2008, 8:43 pm- Re: Epoxy: Ratios by weight
Mark Grieve -- 3/24/2008, 10:59 pm- Re: Epoxy: Ratios by weight
bjalgera -- 3/31/2008, 8:05 am- Re: Epoxy: Ratios by weight
John D. -- 4/1/2008, 1:05 am- Re: Epoxy: Ratios by weight
Mark Grieve -- 3/31/2008, 11:26 pm - Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight *LINK*
Larry C. -- 3/23/2008, 9:14 am- Re: Epoxy: Ratios by weight
Will N to Go -- 3/23/2008, 11:27 am- Re: Epoxy: Ratios by weight
Don T -- 3/23/2008, 1:36 pm- Re: Epoxy: Ratios by weight
Mike Savage -- 3/23/2008, 12:31 pm - Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight
John Monroe -- 3/23/2008, 4:59 am- Re: Epoxy: Ratios by weight
HenkA -- 3/23/2008, 2:13 am- Re: Epoxy: Ratios by weight
Steve Szarawarski -- 3/22/2008, 8:15 pm- Re: Epoxy: Ratios by weight
Glen Smith -- 3/22/2008, 6:39 pm - Re: Epoxy: Ratios by weight
- Re: Epoxy: Ratios by weight *LINK* *Pic*