Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Problem? Solution?
By:Kudzu
Date: 3/23/2008, 8:18 am
In Response To: Re: S&G: Problem? Solution? (Etienne Muller)

First off, this photo is not of the finished ready to fillet hull. I appreciate the input but I am smarter than that. "WINK" This was one taken earlier in the process. Well before I had all hull straighted out. The rear one is just laying there!

The bow bulkhead still looks similar to this though. When I lay out the bulkhead and install it it just isn't the same size as the boat. I have made three for the front. They all fit similar. The upper panels fit very close. The bottom panels appear to be wider than designed. I may have made a mistake laying out the bulkheads but if I did I made the same mistake on all of them. So I doubt it. Besides I worked with coordinate systems for 20 years. Since I have a similar situation at the rear I have to assume that the developed panels from Freeship are not exactly right. They seem to be a bit wider.

Checking the boat everything seems OK. Rocker looks good, the shape looks like I designed. It probably has a bit more V in the bottom at the bow and stern than I designed it with. I though I would take some measurements from the chines to see if that is the case tonight.

If it does the only option is to try to manually correct those bottom panels and I don't have a good reference point to work with. So if it just ended up with more V as I suspect, I will just leave it alone.

Messages In This Thread

S&G: Problem? Solution?
Kudzu -- 3/21/2008, 9:01 pm
Got an answer! I goofed!
Kudzu -- 3/27/2008, 9:32 am
Re: Got an answer! I goofed!
HenkA -- 3/28/2008, 3:38 pm
Re: Got an answer! I goofed!
Kudzu -- 3/29/2008, 10:14 am
Re: Got an answer! I goofed!
HenkA -- 3/30/2008, 7:23 pm
Re: Got an answer! I goofed!
Bryan Hansel -- 3/31/2008, 11:11 am
Re: Got an answer! I goofed!
HenkA -- 4/1/2008, 1:37 am
Re: Got an answer! I goofed!
Bryan Hansel -- 4/1/2008, 11:18 am
Re: Got an answer! I goofed!
Toni V -- 3/31/2008, 1:48 pm
Re: Got an answer! I goofed!
Kudzu -- 3/30/2008, 9:21 pm
Re: Got an answer! I goofed!
Bill Hamm -- 3/27/2008, 4:19 pm
Re: S&G: Problem? Solution? *Pic*
Kudzu -- 3/22/2008, 10:17 pm
Re: S&G: Problem? Solution?
Etienne Muller -- 3/23/2008, 7:23 am
Re: S&G: Problem? Solution?
Kudzu -- 3/23/2008, 8:18 am
Re: S&G: Problem? Solution?
HenkA -- 3/24/2008, 10:26 pm
Re: S&G: Problem? Solution?
Kudzu -- 3/25/2008, 9:14 am
Re: S&G: Problem? Solution?
Bill Hamm -- 3/26/2008, 12:53 am
Re: S&G: Problem? Solution?
Etienne Muller -- 3/24/2008, 10:51 am
Re: S&G: Problem? Solution?
Bill Hamm -- 3/24/2008, 1:00 am
Re: S&G: Problem? Solution?
HenkA -- 3/23/2008, 10:09 pm
Mixed results, not definitive answer
Kudzu -- 3/24/2008, 5:17 pm
Re: Mixed results, not definitive answer
Toni V -- 3/25/2008, 5:24 am
Re: Mixed results, not definitive answer
Bill Hamm -- 3/26/2008, 12:48 am
Re: Mixed results, not definitive answer
HenkA -- 3/28/2008, 3:45 am
Re: Mixed results, not definitive answer
Bill Hamm -- 3/28/2008, 10:57 am
Re: Mixed results, not definitive answer
HenkA -- 3/28/2008, 10:23 pm
Re: Mixed results, not definitive answer
Bill Hamm -- 3/29/2008, 12:55 am
Re: Mixed results, not definitive answer
Robert McMurray -- 3/24/2008, 7:16 pm
Re: S&G: Problem? Solution?
Kudzu -- 3/24/2008, 8:44 am
Re: S&G: Problem? Solution?
Paul Sylvester -- 3/23/2008, 6:38 am
Re: S&G: Problem? Solution?
HenkA -- 3/23/2008, 1:23 am
Re: S&G: Problem? Solution?
Duane Strosaker -- 3/22/2008, 10:49 pm
Re: S&G: Problem? Solution?
Mike Scarborough -- 3/22/2008, 9:00 am
Re: S&G: Problem? Solution? *Pic*
Kudzu -- 3/22/2008, 9:54 am
Re: S&G: Problem? Solution? *Pic*
Duane Strosaker -- 3/22/2008, 12:30 pm
Re: S&G: Problem? Solution? *LINK*
Kudzu -- 3/22/2008, 1:40 pm
Re: S&G: Problem? Solution?
HenkA -- 3/22/2008, 11:38 am
Re: S&G: Problem? Solution?
Mike Scarborough -- 3/24/2008, 8:35 am
Re: S&G: Problem? Solution?
Mike Scarborough -- 3/22/2008, 10:13 am