Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: the dreaded runs...
By:Greg Clopton
Date: 3/26/2008, 12:29 am
In Response To: Epoxy: the dreaded runs... (Todd Sullivan)

I went through the same headaches you describe. I started using the short foam rollers for fill coats that others on this board reccommended and I seemed to get thin enough coats to avoid this problem. They didn't work very well for the wetting coat however, since there was a tendency of the roller to pull the fabric away from the shell.

Messages In This Thread

Epoxy: the dreaded runs...
Todd Sullivan -- 3/25/2008, 9:22 pm
Re: Epoxy: the dreaded runs...
Pedro Almeida -- 3/26/2008, 8:16 pm
Re: Epoxy: taping seams and rollers *LINK*
Rod Tait -- 3/26/2008, 10:38 am
Re: Epoxy: the dreaded runs...
Etienne Muller -- 3/26/2008, 6:58 am
Re: Epoxy: the dreaded runs...
Todd Sullivan -- 3/26/2008, 8:41 am
Stop now. You're done.
Paul G. Jacobson -- 3/27/2008, 6:48 pm
Re: Stop now. You're done.
Acors -- 3/28/2008, 5:17 pm
Re: Stop now. You're done.
Todd Sullivan -- 3/28/2008, 10:15 am
Re: Epoxy: the dreaded runs...
Glen Smith -- 3/26/2008, 10:08 am
Re: Epoxy: the dreaded runs...
Jesper B -- 3/26/2008, 5:16 am
Re: Epoxy: the dreaded runs...
Greg Clopton -- 3/26/2008, 12:29 am
Re: Epoxy: the dreaded runs...
Pedro Almeida -- 3/26/2008, 8:35 pm
Re: Epoxy: the dreaded runs...
Bill Hamm -- 3/27/2008, 7:18 am
Re: Epoxy: the dreaded runs...
Michael McCluskey -- 3/25/2008, 9:50 pm