Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Bungee skeg *LINK* *Pic*
By:Ross Leidy
Date: 4/3/2008, 8:51 am
In Response To: Re: Bungee skeg (Dave Reekie)

A few years back I tried my hand at building a skeg - I used 3 transverse sections of 1/2" pvc pipe embedded in the skeg to center it in the box. I sanded them evenly on each side until the skeg fit the box easily, but with not much play. I thought the minimal contact with the box might also minimize jams. I didn't have this kayak (SK S&G) for long, so I don't know the long-term suitability of the design.

Ross

: Both interesting designs. But what I don't understand, on both of them, is
: that the slot is obviously significantly wider than the width of the skeg
: blade itself - so it can accomodate the bungee, or bungee and axle ends in
: Jay's case. This being so, what keeps the skeg facing straight forwards
: rather than flopping off to one side or the other and acting as a rudder?

: In Jay's case, is it that the 1.5" diameter axle is a snug fit in the
: case and stops the twisting? If so, is this a location for sand to get
: trapped and jam it all up?

: In Kudzu's case, is it that the bungee alongside the skeg makes it a snug
: fit, and you hope that will be enough to keep it stable?

: Thoughts appreciated: I'm intending to build a kayak which will need a skeg
: soon, so I'm following this with interest and this is useful stuff!

: dave

Blue Heron Kayaks

Messages In This Thread

S&G: My version of Johns skeg *Pic*
Kudzu -- 3/26/2008, 9:35 pm
Re: S&G: My version of Johns skeg
Bryan Hansel -- 3/27/2008, 10:10 pm
Re: S&G: My version of Johns skeg
Bill Hamm -- 3/27/2008, 7:04 am
Re: S&G: My version of Johns skeg
Randy Ricchi -- 3/26/2008, 9:55 pm
Re: S&G: My version of Johns skeg
Kudzu -- 3/26/2008, 10:08 pm
Re: S&G: My version of Johns skeg
Toni V -- 3/28/2008, 3:06 am
Re: S&G: My version of Johns skeg
Bill Hamm -- 3/28/2008, 10:48 am
Re: S&G: My version of Johns skeg
Kudzu -- 3/28/2008, 10:23 am
Re: S&G: My version of Johns skeg *Pic*
Gennie -- 3/28/2008, 8:24 am
Bungee skeg *Pic*
Jay Babina -- 4/1/2008, 12:15 pm
Re: Bungee skeg
Dave Reekie -- 4/2/2008, 4:30 am
Re: Bungee skeg *LINK* *Pic*
Ross Leidy -- 4/3/2008, 8:51 am
Re: Bungee skeg
John Eberly -- 4/4/2008, 11:58 am
Re: Bungee skeg
Steve Rasmussen -- 4/3/2008, 12:44 pm
Re: Bungee skeg
Bill Hamm -- 4/3/2008, 12:46 am
Re: Bungee skeg
Dave Reekie -- 4/3/2008, 8:08 am
Re: Bungee skeg
Bill Hamm -- 4/6/2008, 12:44 am
Re: Bungee skeg *Pic*
Bryan Hansel -- 4/2/2008, 1:42 pm
Re: Bungee skeg *LINK* *Pic*
John Caldeira -- 4/5/2008, 2:38 pm
Re: Bungee skeg
Dave Reekie -- 4/3/2008, 8:02 am
Re: Bungee skeg
Bryan Hansel -- 4/3/2008, 8:47 am
Re: Bungee skeg
Bill Hamm -- 4/6/2008, 12:41 am
Re: Bungee skeg *LINK* *Pic*
Bryan Hansel -- 4/6/2008, 1:52 pm
Re: Bungee skeg
Bryan Hansel -- 4/6/2008, 1:48 pm
Re: Bungee skeg
Bill Hamm -- 4/7/2008, 12:39 am
Re: Bungee skeg
Bryan Hansel -- 4/7/2008, 10:50 am
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 9:39 am
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 9:37 am
Re: Bungee skeg
Etienne Muller -- 4/8/2008, 2:05 pm
Re: Bungee skeg
Bryan Hansel -- 4/8/2008, 8:36 pm
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 8:24 pm
Re: Bungee skeg
Mike Savage -- 4/6/2008, 6:22 am
Re: Bungee skeg
Kudzu -- 4/2/2008, 9:09 am
Re: Bungee skeg
Dave Reekie -- 4/2/2008, 9:46 am
Bungee skeg *LINK*
Jay Babina -- 4/2/2008, 7:31 am
Re: Bungee skeg
Bryan Hansel -- 4/1/2008, 1:28 pm
Re: Bungee skeg
Bill Hamm -- 4/2/2008, 12:41 am
Image link fixed *NM*
Jay Babina -- 4/1/2008, 2:07 pm
Re: S&G: My version of Johns skeg
Kudzu -- 3/28/2008, 2:28 pm