Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Bungee skeg
By:John Eberly
Date: 4/4/2008, 11:58 am
In Response To: Re: Bungee skeg *LINK* *Pic* (Ross Leidy)

: A few years back I tried my hand at building a skeg - I used 3 transverse
: sections of 1/2" pvc pipe embedded in the skeg to center it in the
: box. I sanded them evenly on each side until the skeg fit the box easily,
: but with not much play. I thought the minimal contact with the box might
: also minimize jams. I didn't have this kayak (SK S&G) for long, so I don't
: know the long-term suitability of the design.

: Ross

Thanks for your work Ross - Using advanced techniques of TLAR engineering (That Looks About Right) I cloned your setup for my wife's Guillemot. Instead of PVC pipe I used hardwood dowels for the spacer bits. The bungee/cord actuation is about the same. I left the whole skeg box open at 3/4".

The boat is still under construction, so it's not water tested yet. Your ideas were a big help in putting this together.

Messages In This Thread

S&G: My version of Johns skeg *Pic*
Kudzu -- 3/26/2008, 9:35 pm
Re: S&G: My version of Johns skeg
Bryan Hansel -- 3/27/2008, 10:10 pm
Re: S&G: My version of Johns skeg
Bill Hamm -- 3/27/2008, 7:04 am
Re: S&G: My version of Johns skeg
Randy Ricchi -- 3/26/2008, 9:55 pm
Re: S&G: My version of Johns skeg
Kudzu -- 3/26/2008, 10:08 pm
Re: S&G: My version of Johns skeg
Toni V -- 3/28/2008, 3:06 am
Re: S&G: My version of Johns skeg
Bill Hamm -- 3/28/2008, 10:48 am
Re: S&G: My version of Johns skeg
Kudzu -- 3/28/2008, 10:23 am
Re: S&G: My version of Johns skeg *Pic*
Gennie -- 3/28/2008, 8:24 am
Bungee skeg *Pic*
Jay Babina -- 4/1/2008, 12:15 pm
Re: Bungee skeg
Dave Reekie -- 4/2/2008, 4:30 am
Re: Bungee skeg *LINK* *Pic*
Ross Leidy -- 4/3/2008, 8:51 am
Re: Bungee skeg
John Eberly -- 4/4/2008, 11:58 am
Re: Bungee skeg
Steve Rasmussen -- 4/3/2008, 12:44 pm
Re: Bungee skeg
Bill Hamm -- 4/3/2008, 12:46 am
Re: Bungee skeg
Dave Reekie -- 4/3/2008, 8:08 am
Re: Bungee skeg
Bill Hamm -- 4/6/2008, 12:44 am
Re: Bungee skeg *Pic*
Bryan Hansel -- 4/2/2008, 1:42 pm
Re: Bungee skeg *LINK* *Pic*
John Caldeira -- 4/5/2008, 2:38 pm
Re: Bungee skeg
Dave Reekie -- 4/3/2008, 8:02 am
Re: Bungee skeg
Bryan Hansel -- 4/3/2008, 8:47 am
Re: Bungee skeg
Bill Hamm -- 4/6/2008, 12:41 am
Re: Bungee skeg *LINK* *Pic*
Bryan Hansel -- 4/6/2008, 1:52 pm
Re: Bungee skeg
Bryan Hansel -- 4/6/2008, 1:48 pm
Re: Bungee skeg
Bill Hamm -- 4/7/2008, 12:39 am
Re: Bungee skeg
Bryan Hansel -- 4/7/2008, 10:50 am
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 9:39 am
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 9:37 am
Re: Bungee skeg
Etienne Muller -- 4/8/2008, 2:05 pm
Re: Bungee skeg
Bryan Hansel -- 4/8/2008, 8:36 pm
Re: Bungee skeg
Bill Hamm -- 4/8/2008, 8:24 pm
Re: Bungee skeg
Mike Savage -- 4/6/2008, 6:22 am
Re: Bungee skeg
Kudzu -- 4/2/2008, 9:09 am
Re: Bungee skeg
Dave Reekie -- 4/2/2008, 9:46 am
Bungee skeg *LINK*
Jay Babina -- 4/2/2008, 7:31 am
Re: Bungee skeg
Bryan Hansel -- 4/1/2008, 1:28 pm
Re: Bungee skeg
Bill Hamm -- 4/2/2008, 12:41 am
Image link fixed *NM*
Jay Babina -- 4/1/2008, 2:07 pm
Re: S&G: My version of Johns skeg
Kudzu -- 3/28/2008, 2:28 pm