I know that this is a personal choice but I wondering about deck shapes. I have my hull finished except for some(more)sanding. It's time to work on the frames for the strip deck. I have kept the deck rather low to the sheer of the boat. At the ends of the boat I am just finding the width of the boat, using the height I drew of the deck and just making a radius that falls on the three points. It's very slight curve so I should look fine. Just enough radius to give it some strength.

At the cockpit the deck raises up a good bit higher compared to the rest of the deck. I am afraid that just doing a big radius there may look funny. I am wondering if it should be more elliptical maybe? I am pretty sure I will have to just try it on the boat and see. But maybe someone has been down this road and has some advice.