Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Urethane Safety Issues
By:Roy
Date: 5/5/2008, 5:58 am
In Response To: Re: Urethane Safety Issues (Bill Hamm)

: There are no cartridges that are designed specifically for isocyanates. Not
: going to be one either. Cartridges don't take it out of the air, that's
: why a supplied air respirator is required.

: If you're putting this stuff on without spraying it, you need a general
: organic cartridge to remove any traces in the air. And you need a fair
: amount of ventilation, don't even think about doing this in a closed room.

: Bill H.

Thanks for the answer Bill

I sprayed some yesterday....I was just curious, since it was mentioned that there was one that mentioned isocynates, and it was comented about there being one (see portions of this thread above) which number cartridge made by 3m was found to have been the one. (oh and, I always spray outside, and I wear a mask)

I am wearing protection....don't look down there....look me in the eyes...Thank You

Best Wishes
Roy

Messages In This Thread

Material: hBN Coating Abrasion Test *LINK*
Dan Caouette (CSFW) -- 4/29/2008, 8:25 am
Re: Material: hBN Coating Abrasion Test
Acors -- 5/9/2008, 5:11 pm
Re: Material: hBN Coating Abrasion Test------WebKi
Dan Caouette (CSFW------WebKitFormBoundaryHAvdf7mj -- 5/12/2008, 8:21 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 4/30/2008, 1:05 am
Re: Material: hBN Coating Abrasion Test
Robert N Pruden -- 5/2/2008, 1:50 pm
Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- 4/30/2008, 10:17 am
Urethane Safety Issues
Ted Henry -- 4/29/2008, 4:57 pm
Re: Urethane Safety Issues
Roy -- 5/7/2008, 11:05 am
Re: Urethane Safety Issues
Roy -- 5/4/2008, 11:06 am
Re: Urethane Safety Issues
Bill Hamm -- 5/5/2008, 2:10 am
Ditto to what Bill said...------WebKitFormBoundary
Dan Caouette (CSFW)------WebKitFormBoundarydta+Yzz -- 5/5/2008, 9:00 am
Re: Urethane Safety Issues
Roy -- 5/5/2008, 5:58 am
Re: Urethane Safety Issues
Dan Caouette (CSFW) -- 4/30/2008, 10:02 am
Re: Urethane Safety Issues
Dan Caouette (CSFW) -- 4/30/2008, 10:06 am
Part III
Dan Caouette (CSFW) -- 4/30/2008, 10:06 am
Part II
Dan Caouette (CSFW) -- 4/30/2008, 10:04 am
Re: Urethane Safety Issues Part 1
Dan Caouette (CSFW) -- 4/30/2008, 10:03 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 5:21 pm
Re: Urethane Safety Issues
Bill Hamm -- 4/30/2008, 1:11 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/30/2008, 9:32 am
Re: Urethane Safety Issues
Ted Henry -- 4/29/2008, 9:11 pm
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 9:37 pm
Re: Urethane Safety Issues
Bill Hamm -- 4/30/2008, 1:14 am
Re: Urethane Safety Issues
Steve Rasmussen -- 4/29/2008, 7:50 pm
Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- 4/29/2008, 9:44 am
Re: Material: hBN Coating Abrasion Test
Acors -- 5/9/2008, 6:01 pm
Re: Material: hBN Coating Abrasion Test
Dan Caouette (CSFW) -- 4/30/2008, 9:40 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 4/30/2008, 1:07 am
Re: Material: hBN Coating Abrasion Test
Bryan Hansel -- 4/30/2008, 8:58 am
Re: Material: hBN Coating Abrasion Test
Bill Hamm -- 5/1/2008, 1:21 am
Test Link *LINK*
Dan Caouette (CSFW) -- 4/29/2008, 8:27 am
question
LeeG -- 5/14/2008, 12:48 pm
Re: question------WebKitFormBoundaryaMY9uSPYUF94+D
Dan Caouette (CSFW)------WebKitFormBoundaryaMY9uSP -- 5/14/2008, 3:17 pm
Re: Test Link
Dave Reekie -- 4/29/2008, 1:14 pm