: I have just put on 2 thin filler coats of epoxy with a foam roller, the base
: was well sanded epoxy. The new finish is "orange peel" as it
: goes off, I tried tipping it off with a foam brush but I was a bit late.
: It's not a big deal as I will be giving it a light sand before I put on
: another coat in a day or so. I'd just like to know if I can avoid it next
: time.
: Glen G.

Hi Glen

The purpose of filler coats its to give you enough depth of epoxy to sand without sanding into the glass. These coats by definition have to be applied without sanding between them. If you have sanded already then you are adding filler coats for no reason that I can see except to add extra weight and extra work.

Are you sure these coats are necessary at all??

Et