Go for it.
In Response To: Re: Skin-on-Frame: Materials (Chris Noel)
Sure, use it! You'll likely have to screw and/or lash the stringers to the frames, unless you have some sort of mysterious umhwp glue. I often screw my stringers to the frames, and it's not an issue.
The plastic frames will be heavier than the plywood ones - but there's no real reason you can't use it. Should be pretty stout, if heavy.
Of course, there ARE other ways to make a SOF kayak that don't involve plywood or plastic at all . . . .
Good luck!
Dave
Messages In This Thread
- Skin-on-Frame: Materials
Chris Noel -- 6/3/2008, 2:49 pm- Re: Skin-on-Frame: Materials
Thomas Ziegler -- 6/3/2008, 4:52 pm- Re: Skin-on-Frame: Materials
Chris Noel -- 6/3/2008, 5:19 pm- Go for it.
Dave Gentry -- 6/3/2008, 5:59 pm- Re: Go for it. *LINK*
Dave Gentry -- 6/3/2008, 6:08 pm
- Re: Skin-on-Frame: Materials
Bill Hamm -- 6/3/2008, 5:54 pm- Re: Skin-on-Frame: Materials
Chris Noel -- 6/4/2008, 7:27 am
- Re: Go for it. *LINK*
- Go for it.
- Re: Skin-on-Frame: Materials
- Re: Skin-on-Frame: Materials