: Does anyone have any advice or experience with cold curing epoxy? I am almost
: ready to fiberglass, and the weather in Portland OR is not cooperating at
: all. I am pretty much forced to do my glassing outside (no shop). Can
: anyone recommend a good brand if I am forced to use the cold weather
: catalysts?

: Any input would be appreciated.
: Mark

Epoxy loves heat. If you want to have a transparent glass lay-up you need to have the warmest place possible. Forget what the epoxy makers say about low temperature curing epoxy. IT'S NOT For glass wet-out!

That said spend the extra for a thin viscosity "wet-out" resin, like System Three's "Clear Coat".

Still for the all the work you're putting into this boat I suggest it's worth having a warm place. Married? Send the wife off to mothers for the weekend and glass in the living room. Got a friend with a warm place?

Does the sun ever shine there? Make a lean-to of plastic on the south side of the house and wait for a sunny day.

Don't be in a hurry. You may be looking at this boat for many years to come, so think, plan, and do your best.

Good luck,
Rob