: This is more of touring boat so it probably won't be rolled, well more than
: half way anyway.
: The boat is 24" wide. The opening is a standard (at least I thought so)
: Ocean Cockpit. I debated a long time about what to do on this boat. I have
: tried keyholes and unless they are really large I can't get in them butt
: first. My knees just don't bend enough. And I hate long cockpits as it is
: hard for me to reach my water bottle or anything on the deck. So I decided
: on the OC cockpit.
: Just measured to make sure and it is 16" x 20" opening. Isn't that
: a standard OC? Somewhere along the way I messed up on my form and it is
: actually 151/2" wide, but I am betting that is close enough. But if I
: wrong on my size, I can still change it now.
The boat in the pic isd a Nimrod 2 circa 17 years old.
It is 19 ft long and 2 ft wide. The cockpit is 21 inches x 15 and a half inches. Getting in and out is no problem even for big guys if they do not cast too wide a shadow, but this is a very big boat and there is quite a lot of deck height so the angle of entry is not too bad.
Although there is a fair bit of side deck the boat will actually roll ok. The high bouyant deck and shape aft may help with this though.
In all it's years this boat has unexpectedly capsized only once. The guy in it (pictured here) was dozing while waiting for the rest of the party and a bit of swell lifted his stern onto a flat rock and then sank away under him. By the time he woke up he was in the drink.
Et
Messages In This Thread
- Strip: More coaming questions. *Pic*
Kudzu -- 6/5/2008, 9:34 pm- OK, I trimmed it down *Pic*
Kudzu -- 6/6/2008, 11:10 pm- Re: Strip: More coaming questions.
Jay Babina -- 6/6/2008, 9:20 am- Re: Strip: More coaming questions.
Etienne Muller -- 6/6/2008, 9:42 am- Re: Strip: More coaming questions.
Kudzu -- 6/6/2008, 9:59 am- 16" wide is correct *NM*
Jay Babina -- 6/6/2008, 2:21 pm- Re: Strip: More coaming questions. *Pic*
Etienne Muller -- 6/6/2008, 11:04 am - Re: Strip: More coaming questions. *Pic*
- 16" wide is correct *NM*
- Re: Strip: More coaming questions.
- Re: Strip: More coaming questions. *Pic*
Etienne Muller -- 6/6/2008, 8:11 am- Re: Strip: More coaming questions.
Kudzu -- 6/6/2008, 9:02 am- Re: Strip: More coaming questions. *Pic*
Etienne Muller -- 6/6/2008, 9:21 am
- Re: Strip: More coaming questions. *Pic*
- Re: Strip: More coaming questions.
JohnK -- 6/5/2008, 11:40 pm - Re: Strip: More coaming questions.
- OK, I trimmed it down *Pic*