: I finished one of the seams today on my Iggy. Built with 1" seam tape
: and black epoxy. I ran a 1" piece of masking tape down the seam, then
: surrounded it one each side with another 1" piece of masking tape.
: Peeled the center tape off, wet out the wood with a layer of black epoxy,
: put the tape into place, and painted on more epoxy.

: The last seam tape will go on in the morning, and then I have to finish the
: skeg control and layup the bulkheads, but the bulkheads will have to wait
: until I'm back from Norway the first week of August...

: This boat is slow going.

Hi Bryan,

The black seams look really nice

Bill H.