Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Help with Stapleless...
By:paul power
Date: 7/29/2008, 8:16 pm
In Response To: Re: Strip: Help with Stapleless... *Pic* (Clayton Plunkett)

If you're using bead and cove the dowel and bell-headed screw system works well, you have to be careful not to tighten it down too much, you don't need a lot of pressure, just enough for it to set up. Depending on the curve you can do 2 or 3 strips at a time. It takes more time that's all. I work in a homeless shelter and I use the elastic ties that we hand out to intravenous drug users. Very strong, and they don't mark the wood.

Messages In This Thread

Strip: Help with Stapleless...
Brion -- 7/27/2008, 10:34 am
Re: Strip: Help with Stapleless... *LINK*
Pawistik -- 7/28/2008, 6:07 pm
Re: Strip: Help with Stapleless...
Brion -- 7/28/2008, 6:19 pm
Re: Strip: Help with Stapleless...
Pawistik -- 7/28/2008, 6:41 pm
Re: Strip: Help with Stapleless...
Brion -- 7/27/2008, 7:38 pm
Masking Tape.
Allan -- 7/27/2008, 6:10 pm
Re: Strip: Help with Stapleless... *Pic*
Clayton Plunkett -- 7/27/2008, 11:27 am
Re: Strip: Help with Stapleless...
paul power -- 7/29/2008, 8:16 pm
Re: Strip: Help with Stapleless... *NM*
paul power -- 7/29/2008, 7:53 pm
Re: Strip: Help with Stapleless... *LINK*
Rod Tait (Orca Boats) -- 7/27/2008, 11:11 am
Re: Strip: Help with Stapleless...
Glen Smith -- 7/27/2008, 10:59 am