Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Another option is...
By:Brian Nystrom
Date: 8/15/2008, 7:30 am
In Response To: Re: Epoxy: Edge delamination (JohnK)

...to scrape the surface smooth before cleaning it. Unlike sanding, scraping will not drive surface impurities into the surface. Once it's scraped and chemically cleaned, you can sand it to provide some tooth for the next coat.

Messages In This Thread

Epoxy: Edge delamination
Glen Gray -- 8/13/2008, 4:13 am
Re: Epoxy: Edge delamination
Glen Gray -- 8/16/2008, 9:21 am
Re: Epoxy: Edge delamination
JohnK -- 8/16/2008, 5:00 pm
Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 5:04 am
Re: Epoxy: Edge delamination
Brian Nystrom -- 8/14/2008, 8:11 am
Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 6:29 pm
Another option is...
Brian Nystrom -- 8/15/2008, 7:30 am
Re: Another option is...
Glen Gray -- 8/15/2008, 6:24 pm
Re: Epoxy: Edge delamination
JohnK -- 8/13/2008, 7:52 pm
Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 3:48 am
Re: Epoxy: Edge delamination
Glen Gray -- 8/14/2008, 6:59 am
Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 7:19 am
Re: Epoxy: Edge delamination *Pic*
Glen Gray -- 8/14/2008, 7:22 am
Re: Epoxy: Edge delamination
Bill Hamm -- 8/16/2008, 1:44 am
Re: Epoxy: Edge delamination
JohnK -- 8/14/2008, 6:22 pm