Saw off the whole tip a couple inches back, glue (epoxy) on a block of complimentary hardwood (maybe cherry or walnut), after it's cured shape to match the contours of the sides and deck, coat with epoxy and maybe some thin glass.

Ross

: Not sure how this happened. I assume it happened on the Night paddle. I ran
: the boat up on the bank and while climbing out managed to loose my balance
: and turned it over. I am assuming it hit a rock when I rolled it over. I
: just discovered it today when I was unloading to go paddling.

: Now, what is the best way to fix this? Replacing the damaged strip on the
: deck is easy enough. Just not sure about the plywood. Try to epoxy another
: strip on ply in? Or try to build it up with glass? Or something else??