Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Trim your Artic Hawk
By:Bill Hamm
Date: 9/12/2008, 1:23 am
In Response To: Trim your Artic Hawk *Pic* (Dave Houser)

: While you are building your new kayak keep paddling your Arctic Hawk but you
: should trim it to eliminate the weathercocking. All you need to do is to
: add a little weight far aft. Put a water bag under your stern rigging and
: add water into it until the kayak is neutral in a crosswind. If there is
: room in your cockpit opening, moving the seat back also works.

: Adding the right sized skeg is another method to make a weathercocking kayak
: wind neutral but it also makes the kayak much harder to turn. (Make the
: skeg too big so the kayak leecocks and file it smaller until the kayak is
: wind neutral.)

: Happy Paddling
: Dave

: Photo by Duane Strosaker

Or, you could leave the skeg just big enough to lee cock a little and then you can use it on the rare occasion that it's helpful, just pulling it up a little will enable it to prevent weathercocking.

Bill H.

Messages In This Thread

Strip: Help in deciding on a design to build
RickSp -- 9/8/2008, 10:09 am
Trim your Artic Hawk *Pic*
Dave Houser -- 9/11/2008, 4:20 pm
Re: Trim your Artic Hawk
Bill Hamm -- 9/12/2008, 1:23 am
Re: Trim your Artic Hawk
Dave Houser -- 9/12/2008, 3:13 pm
Re: Trim your Artic Hawk
RickSp -- 9/11/2008, 4:33 pm
Re: Strip: Help in deciding on a design to build *LINK* *Pic*
Charles Leach -- 9/10/2008, 7:24 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:14 pm
Re: Strip: Help in deciding on a design to build
Len Thunberg -- 9/9/2008, 10:39 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:34 am
Re: Strip: Help in deciding on a design to build
Podge -- 9/9/2008, 1:31 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:37 am
Re: Strip: Help in deciding on a design to build
Podge -- 9/10/2008, 9:28 am
Re: Strip: Help in deciding on a design to build
Tommy -- 9/8/2008, 11:40 am
Re: Strip: Help in deciding on a design to build
John Eberly -- 9/8/2008, 11:54 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/8/2008, 1:44 pm
Re: Strip: Help in deciding on a design to build
Paul G. Jacobson -- 9/9/2008, 12:25 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:46 am
Re: Strip: Help in deciding on a design to build
Paul G. Jacobson -- 9/10/2008, 7:12 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:09 pm
Re: Strip: Help in deciding on a design to build
Bryan Hansel -- 9/8/2008, 10:18 pm
Re: Strip: Help in deciding on a design to build
BobKayes -- 9/8/2008, 2:58 pm
OOPS ! ! ! !
BobKayes -- 9/11/2008, 8:50 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:40 am
Re: Strip: Help in deciding on a design to build
Oliver Bloch -- 9/8/2008, 5:04 pm
Re: Strip: Help in deciding on a design to build
Bill Hamm -- 9/10/2008, 1:32 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:48 am