Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Trim your Artic Hawk
By:Dave Houser
Date: 9/12/2008, 3:13 pm
In Response To: Re: Trim your Artic Hawk (Bill Hamm)

: Or, you could leave the skeg just big enough to lee cock a little and then
: you can use it on the rare occasion that it's helpful, just pulling it up
: a little will enable it to prevent weathercocking.

: Bill H.

You are absolutily right. A deployable skeg should be oversized when fully down to allow a kayak to leecock when going downwind or in following seas. And when up the kayak design should weathercock to paddle into the wind. And in a crosswind be partially deployed to make the kayak wind (and wave) neutral.

A fixed skeg needs to be sized to make the kayak wind neutral. Better yet is to have a kayak designed to not need a skeg i.e. wind neutral without one.

Dave

Messages In This Thread

Strip: Help in deciding on a design to build
RickSp -- 9/8/2008, 10:09 am
Trim your Artic Hawk *Pic*
Dave Houser -- 9/11/2008, 4:20 pm
Re: Trim your Artic Hawk
Bill Hamm -- 9/12/2008, 1:23 am
Re: Trim your Artic Hawk
Dave Houser -- 9/12/2008, 3:13 pm
Re: Trim your Artic Hawk
RickSp -- 9/11/2008, 4:33 pm
Re: Strip: Help in deciding on a design to build *LINK* *Pic*
Charles Leach -- 9/10/2008, 7:24 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:14 pm
Re: Strip: Help in deciding on a design to build
Len Thunberg -- 9/9/2008, 10:39 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:34 am
Re: Strip: Help in deciding on a design to build
Podge -- 9/9/2008, 1:31 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:37 am
Re: Strip: Help in deciding on a design to build
Podge -- 9/10/2008, 9:28 am
Re: Strip: Help in deciding on a design to build
Tommy -- 9/8/2008, 11:40 am
Re: Strip: Help in deciding on a design to build
John Eberly -- 9/8/2008, 11:54 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/8/2008, 1:44 pm
Re: Strip: Help in deciding on a design to build
Paul G. Jacobson -- 9/9/2008, 12:25 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:46 am
Re: Strip: Help in deciding on a design to build
Paul G. Jacobson -- 9/10/2008, 7:12 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:09 pm
Re: Strip: Help in deciding on a design to build
Bryan Hansel -- 9/8/2008, 10:18 pm
Re: Strip: Help in deciding on a design to build
BobKayes -- 9/8/2008, 2:58 pm
OOPS ! ! ! !
BobKayes -- 9/11/2008, 8:50 am
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:40 am
Re: Strip: Help in deciding on a design to build
Oliver Bloch -- 9/8/2008, 5:04 pm
Re: Strip: Help in deciding on a design to build
Bill Hamm -- 9/10/2008, 1:32 pm
Re: Strip: Help in deciding on a design to build
RickSp -- 9/10/2008, 8:48 am