Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: rolling bevel: first stripper => gaps i
By:Chris Sperry
Date: 9/26/2008, 8:14 pm
In Response To: Strip: rolling bevel: first stripper => gaps inside hull (Chris Sperry)

Thank you all for the good advice. I may then do some gap filling in a few places, then seal and fiberglass as normal. I will be adding extra abrasion layers to the hull, and plan to use S-glass.

The boat is now flipped over, and on to the deck.

Thanks,
Chris

Messages In This Thread

Strip: rolling bevel: first stripper => gaps inside hull
Chris Sperry -- 9/26/2008, 3:37 pm
Re: Strip: rolling bevel: first stripper => gaps i
Ken F -- 9/29/2008, 3:26 pm
Re: Strip: rolling bevel: first stripper => gaps i
Tom Raymond -- 9/29/2008, 10:53 am
Filling Gaps
Jay Babina -- 9/27/2008, 10:56 am
Re: Filling Gaps
Chris Sperry -- 9/28/2008, 7:53 am
Re: Filling Gaps
Paul G. Jacobson -- 9/28/2008, 11:13 pm
Re: Filling Gaps / cedar supplier
Chris Sperry -- 9/30/2008, 8:17 pm
Re: Filling Gaps
Ken Brunton -- 9/29/2008, 11:35 am
Re: Filling Gaps
Paul G Jacobson -- 9/29/2008, 7:38 pm
Re: Filling Gaps
Ken Brunton -- 9/30/2008, 1:03 pm
Re: Filling Gaps
Bill Hamm -- 9/30/2008, 1:44 am
Re: Strip: rolling bevel: first stripper => gaps i
Chris Sperry -- 9/26/2008, 8:14 pm
Re: Strip: rolling bevel: first stripper => gaps i
Bryan Hansel -- 9/26/2008, 7:28 pm
Re: Strip: rolling bevel: first stripper => gaps i
PatrickC -- 9/26/2008, 6:01 pm
Re: Strip: rolling bevel: first stripper => gaps i
Robin Boys -- 9/26/2008, 5:27 pm