Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: kevlar uses
By:Paul G. Jacobson
Date: 10/10/2008, 2:41 am
In Response To: Re: Skin-on-Frame: kevlar uses (Bill Hamm)

: Paul,

: There are two different kinds of Kevlar (it's a trade name), Kevlar 49 is
: used for composites - what we'd use and Kevlar 29 is used for ballistics,
: they are not the same material and Kevlar 29 won't work with composites.
: Common misconception.

: Bill H.

True, but in this case he wanted to use kevlar fabric for skinning an SOF kayak, not as a layer in a composite. The Kevlar 29 fabric used for protective gear is commonly sewn, and would be a better choice for a skin than the Kevlar 49 used in composites.

While the ballistic cloth is hard to find, there are always going to be yards of 'mill ends' and 'seconds' bolts with occasional defects that would make the material unsuitable for a bulletproof vest, but great for skinning a kayak.
Despite the military applications, this stuff is not regulated or restricted. Anyone can buy it. Problem is finding someone who will sell a short length.
Finding these deals is a hobby in itself !
PGJ

Messages In This Thread

Skin-on-Frame: kevlar skin...? Been done?
James -- 10/8/2008, 8:41 am
Re: Skin-on-Frame: kevlar skin...? Been done?
Bill Hamm -- 10/8/2008, 4:22 pm
Re: Skin-on-Frame: kevlar skin...? Been done?
James -- 10/8/2008, 5:30 pm
Re: Skin-on-Frame: kevlar uses
Paul G. Jacobson -- 10/8/2008, 11:16 pm
Re: Skin-on-Frame: kevlar uses
Bill Hamm -- 10/9/2008, 7:51 pm
Re: Skin-on-Frame: kevlar uses
Paul G. Jacobson -- 10/10/2008, 2:41 am
Re: Skin-on-Frame: kevlar uses
Bill Hamm -- 10/11/2008, 1:57 am
Tensioning kevlar skins
Paul G. Jacobson -- 10/11/2008, 3:57 pm
Re: Tensioning kevlar skins
Bill Hamm -- 10/12/2008, 1:39 am
Re: Skin-on-Frame: kevlar uses
Tom Raymond -- 10/9/2008, 5:28 pm
Re: Skin-on-Frame: kevlar skin...? Been done?-----
Mike Bielski------WebKitFormBoundarytL3U7EgH90b+DW -- 10/8/2008, 4:21 pm
Re: Skin-on-Frame: kevlar skin...? Been done?
Paul G. Jacobson -- 10/8/2008, 1:01 pm