Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Seaming a composite Sit on Top...
By:Charlie
Date: 12/22/2008, 1:33 pm
In Response To: Other: Seaming a composite Sit on Top... (Andy)

I'm rather surprised that your prime considersation involves something at the tail end of the process.
Hulls made with fabric laminates are usually done over molds. The entire process is very labor intensive and building the mold can be more difficult than laying up the hull. In my view, building a mold for only a single hull is not worth the effort.
If you are experienced go ahead. But, if you are not, attempting something like this with an extremely expensive fabric like carbon fiber could be risking a lot of money.
In the years I have monitored this site there have been dozens of propositions like yours but only one person ever came back with evidence that the project was successful. And that individual seemed to be part of a crew of who shared the burdensome workload and the expense.
Don't mean to be negative. I looked into this some years ago and concluded it wasn't a project for a lone indiviual and it had the downside of being very easy to screw up.

: I am considering building a Carbon Fiber sit on top kayak. I feel pretty good
: about everything except how to seam the deck to the hull without having
: access to the inside... any ideas?

Messages In This Thread

Other: Seaming a composite Sit on Top...
Andy -- 12/20/2008, 10:55 pm
Back to the seam issue
Paul G. Jacobson -- 12/26/2008, 5:31 pm
Re: Back to the seam issue
Bill Hamm -- 12/27/2008, 11:25 am
Re: Other: Seaming a composite Sit on Top...
Charlie -- 12/22/2008, 1:33 pm
Re: Other: Seaming a composite Sit on Top...
Sam McFadden -- 12/22/2008, 2:36 pm
Re: Other: Seaming a composite Sit on Top...
Charlie -- 12/22/2008, 5:08 pm
Re: Other: Seaming a composite Sit on Top... *LINK*
Sam McFadden -- 12/22/2008, 5:23 pm
Re: Other: Seaming a composite Sit on Top... *LINK*
Daniel Daniels -- 12/28/2008, 4:58 pm
Re: Other: Don't Point that Thing at Me!
Charlie -- 12/28/2008, 8:35 pm
Re: Other: Don't Point that Thing at Me!
daniel daniels -- 12/29/2008, 3:46 am
Re: Other: Seaming a composite Sit on Top...
Roy -- 12/25/2008, 10:34 am
Pumps
Sam McFadden -- 12/25/2008, 1:29 pm
Re: Pumps
Roy -- 12/25/2008, 1:55 pm
Re: Pumps *LINK*
Sam McFadden -- 12/25/2008, 10:28 pm
Re: Pumps
Roy -- 12/26/2008, 4:51 pm
I'm Amazed...
Ken Brunton -- 12/23/2008, 12:45 pm
Re: Other: Seaming a composite Sit on Top...
Bill Hamm -- 12/23/2008, 12:56 am
Re: Other: Seaming a composite Sit on Top...
Sam McFadden -- 12/23/2008, 10:15 am
Re: Other: Seaming a composite Sit on Top...
Bill Hamm -- 12/24/2008, 1:28 am
Infusion vs. wet lay-up
Sam McFadden -- 12/24/2008, 10:55 am
Re: Infusion vs. wet lay-up
Bill Hamm -- 12/25/2008, 1:06 am
Re: Infusion vs. wet lay-up
Sam McFadden -- 12/25/2008, 1:52 pm
Re: Infusion vs. wet lay-up
Bill Hamm -- 12/25/2008, 8:44 pm
Re: Infusion vs. wet lay-up
Sam McFadden -- 12/25/2008, 10:33 pm
Re: Other: Seaming a composite Sit on Top...
Charlie -- 12/22/2008, 10:44 pm
I'm a fan
Ted Henry -- 12/23/2008, 11:18 am
Thanks *NM*
Sam McFadden -- 12/24/2008, 11:45 am
Whoa! Charlie, Not so fast
Reg Lake -- 12/23/2008, 1:30 am
Re: Whoa! Charlie, Not so fast
Sam McFadden -- 12/23/2008, 10:35 am
Re: Whoa! Charlie, Not so fast
Charlie -- 12/23/2008, 8:28 am
Good intentions.
Reg Lake -- 12/23/2008, 5:16 pm
Re: Other: Seaming a composite Sit on Top... *LINK*
Sam McFadden -- 12/21/2008, 2:35 pm
Re: Other: Seaming a composite Sit on Top... *Pic*
Reg Lake -- 12/21/2008, 2:06 am
Re: Other: Seaming a composite Sit on Top...
Bill Hamm -- 12/21/2008, 1:30 am