Thanks Eric, nice use of the CNC equipment. I was making fins for my Mystery by gluing patterns to mdf, sanding to the lines, glueing one on each end of 20lb density foam and sanding the foam off with a belt sander, then glassing that. I was also playing with the pivot point but came to no conclusions so I didn't comment on your first question. I would be interested in seeing both the fins and the K-1 upon completion.

Best,

Reg

: I have a CNC router and was wanting to make a new flatwater rudder for my
: Fenn Mako surfski and didn't want to take the time to re-draft the foil
: shapes each time I changed it, so I made the script which allows you to
: slide some sliders and make the lines which can then be lofted. I cut a
: practice rudder out of MDF and it came out absolutely perfect, fair
: curves. Ain't technology grand?!

: Also, I have a 17' K1 racing kayak I am in the middle of building.. I really
: need to get moving on it more. Got the hull finished, but not glassed.
: It's about just under 17" max beam. I'll post pics once it's
: finished.

: Eric