Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Brush or Roll on oil based spar
By:Phil Nelson
Date: 2/5/2009, 6:22 am
In Response To: Re: Skin-on-Frame: Brush or Roll on oil based spar (Bill Hamm)

What about using a squeegee ?

: Actually I've gotten away from using foam roller covers, except for rolling
: epoxy. I've had cheaper roller covers delaminate with epoxy, makes a
: horrible mess.

: The thin regular roller covers I've found work better even with varnish,
: cheaper too.

: Bill H.

: Bill H.

Messages In This Thread

Skin-on-Frame: Brush or Roll on oil based spar urethane?
Brent -- 4/17/2008, 4:34 pm
Re: Skin-on-Frame: Brush or Roll on oil based spar
Brian Nystrom -- 4/20/2008, 9:39 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 4/21/2008, 2:10 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Phil Nelson -- 2/5/2009, 6:22 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 2/5/2009, 2:24 pm
Re: Skin-on-Frame: Brush or Roll on oil based spar
Brian Nystrom -- 2/6/2009, 9:51 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 2/6/2009, 9:56 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Brian Nystrom -- 2/5/2009, 7:44 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Phil Nelson -- 2/5/2009, 10:40 pm
Re: Skin-on-Frame: Brush or Roll on oil based spar
Brian Nystrom -- 2/6/2009, 9:45 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 2/6/2009, 9:54 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Glen Smith -- 2/6/2009, 12:00 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Scott Shurlow -- 4/18/2008, 6:26 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 4/20/2008, 1:06 am
Re: Skin-on-Frame: Brush or Roll on oil based spar
Brian Nystrom -- 4/20/2008, 9:35 am
Darin Wright
Blanche Barnes -- 11/13/2008, 2:14 am
*SPAM* *NM*
Greg H -- 11/14/2008, 12:46 pm
Re: Skin-on-Frame: Brush or Roll on oil based spar
Bill Hamm -- 4/21/2008, 2:07 am