Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re:rolling bevel *Pic*
By:Chris Sperry
Date: 2/6/2009, 10:04 am
In Response To: Re: Material: Hardwood kayak? (Paul Lueders)

: The rolling bevel sound awfully hard to
: do.

Although seemingly a slow process, I liked building my Guillemot with a rolling bevel. I built a vise out of poplar, and screwed the poplar to a pine board.

The vise is 42 inches long. Inside the jaws are two compression springs that are seated on flat washers; the internal washers are recessed in a shallow hole. 1/2" hex bolts pass through the springs, and the vise is tightened with two wing nuts. The compression springs are just enough to pop the vise open a small amount.

In the photo you can see two strips inside the vise. These strips are slightly thinner than my 1/4" strips, and are glued to one side of the vise. The top internal strip supports the strip that is in the vise.

The vise is quick to use, and I just moved it around the boat as needed, using quick clamps to secure the vise to my long skinny work surface on both sides of the kayak. I also used the vise hold the strips while applying Titebond glue.

Chris

Messages In This Thread

Material: Hardwood kayak?
Paul Lueders -- 2/4/2009, 2:57 pm
Re: Material: Hardwood kayak? *NM*
Paul Lueders -- 2/9/2009, 12:00 pm
Re: Material: Hardwood kayak? *LINK* *Pic*
Andy Waddington -- 2/9/2009, 11:21 am
Re: Material: Hardwood kayak?
Paul Lueders -- 2/9/2009, 12:04 pm
Re: Material: Hardwood kayak?
wwfloyd -- 2/5/2009, 3:51 pm
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/6/2009, 2:08 am
Re: Material: Hardwood kayak?
Don Lucas -- 2/6/2009, 10:00 am
Re: Material: Hardwood kayak?
Glen Smith -- 2/5/2009, 7:44 pm
Re: Material: Hardwood kayak?
Ted Henry------WebKitFormBoundaryizgkDj+25Ku9k5c1 -- 2/5/2009, 12:18 pm
Re: Material: Hardwood kayak?
Paul Lueders -- 2/5/2009, 8:29 am
Re: Material: Hardwood kayak? *Pic*
Andy Waddington -- 2/9/2009, 11:37 am
Re:rolling bevel *Pic*
Chris Sperry -- 2/6/2009, 10:04 am
Re:rolling bevel
Etienne Muller -- 2/8/2009, 4:46 pm
Re:rolling bevel
Chris Sperry -- 2/9/2009, 7:20 am
Re:rolling bevel
Andy Waddington -- 2/9/2009, 11:49 am
Re:rolling bevel
Bill Hamm -- 2/9/2009, 1:15 am
Re:rolling bevel *Pic*
John Monroe -- 2/8/2009, 4:25 am
Re:rolling bevel
Roy Morford -- 2/8/2009, 12:28 pm
Re:rolling bevel
John Monroe -- 2/9/2009, 2:43 am
Re:rolling bevel
Chris Sperry -- 2/8/2009, 11:32 pm
Re:rolling bevel
Roy Morford -- 2/9/2009, 12:18 am
Re:rolling bevel
Chris Sperry -- 2/9/2009, 6:43 am
Re:rolling bevel
Roy Morford -- 2/9/2009, 9:57 am
Re:rolling bevel
Chris Sperry -- 2/9/2009, 9:46 pm
Re:rolling bevel
Paul Lueders -- 2/6/2009, 1:30 pm
Re:rolling bevel
Paul Lueders -- 2/6/2009, 3:52 pm
Re:rolling bevel
Bill Hamm -- 2/8/2009, 12:36 am
Re:rolling bevel
Chris Sperry -- 2/6/2009, 3:10 pm
Re:rolling bevel *NM* *Pic*
Chris Sperry -- 2/6/2009, 10:07 am
Re:rolling bevel
Bill Hamm -- 2/6/2009, 1:13 pm
Re:rolling bevel
Chris Sperry -- 2/6/2009, 3:17 pm
Re: Material: Hardwood kayak?
Paul Lueders -- 2/5/2009, 6:23 pm
Re: Material: Hardwood kayak?
Bill Hamm -- 2/6/2009, 9:57 am
Re: Material: Hardwood kayak?
Paul Lueders -- 2/6/2009, 1:21 pm
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/5/2009, 1:19 pm
Re: Material: Hardwood kayak? *LINK*
Sam McFadden -- 2/5/2009, 12:28 pm
Re: Material: Hardwood kayak?
Bill Hamm -- 2/5/2009, 1:55 am
Re: Material: Hardwood kayak?
Rich K -- 2/5/2009, 12:34 am
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/5/2009, 12:17 am
Re: Material: Hardwood kayak?
Brian Nystrom -- 2/5/2009, 7:41 am
Re: Material: Hardwood kayak?
Donovan -- 2/4/2009, 4:14 pm