Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re:rolling bevel
By:Chris Sperry
Date: 2/6/2009, 3:10 pm
In Response To: Re:rolling bevel (Paul Lueders)

Paul,
Remember that not all of your strips will be full length. On the hull, once you strip past the chines, the strips become significantly shorter. On the deck, most of the strips are shorter due to the cockpit cutout.

I am happy working about 4-5 feet of bevel before I move the strip or move the vise. It's common to fit two complete strips on one side of your kayak, and then move to the other side for two strips. The length of my vise was dictated by the length of the poplar board I had on hand.

Experiment!

Chris

Messages In This Thread

Material: Hardwood kayak?
Paul Lueders -- 2/4/2009, 2:57 pm
Re: Material: Hardwood kayak? *NM*
Paul Lueders -- 2/9/2009, 12:00 pm
Re: Material: Hardwood kayak? *LINK* *Pic*
Andy Waddington -- 2/9/2009, 11:21 am
Re: Material: Hardwood kayak?
Paul Lueders -- 2/9/2009, 12:04 pm
Re: Material: Hardwood kayak?
wwfloyd -- 2/5/2009, 3:51 pm
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/6/2009, 2:08 am
Re: Material: Hardwood kayak?
Don Lucas -- 2/6/2009, 10:00 am
Re: Material: Hardwood kayak?
Glen Smith -- 2/5/2009, 7:44 pm
Re: Material: Hardwood kayak?
Ted Henry------WebKitFormBoundaryizgkDj+25Ku9k5c1 -- 2/5/2009, 12:18 pm
Re: Material: Hardwood kayak?
Paul Lueders -- 2/5/2009, 8:29 am
Re: Material: Hardwood kayak? *Pic*
Andy Waddington -- 2/9/2009, 11:37 am
Re:rolling bevel *Pic*
Chris Sperry -- 2/6/2009, 10:04 am
Re:rolling bevel
Etienne Muller -- 2/8/2009, 4:46 pm
Re:rolling bevel
Chris Sperry -- 2/9/2009, 7:20 am
Re:rolling bevel
Andy Waddington -- 2/9/2009, 11:49 am
Re:rolling bevel
Bill Hamm -- 2/9/2009, 1:15 am
Re:rolling bevel *Pic*
John Monroe -- 2/8/2009, 4:25 am
Re:rolling bevel
Roy Morford -- 2/8/2009, 12:28 pm
Re:rolling bevel
John Monroe -- 2/9/2009, 2:43 am
Re:rolling bevel
Chris Sperry -- 2/8/2009, 11:32 pm
Re:rolling bevel
Roy Morford -- 2/9/2009, 12:18 am
Re:rolling bevel
Chris Sperry -- 2/9/2009, 6:43 am
Re:rolling bevel
Roy Morford -- 2/9/2009, 9:57 am
Re:rolling bevel
Chris Sperry -- 2/9/2009, 9:46 pm
Re:rolling bevel
Paul Lueders -- 2/6/2009, 1:30 pm
Re:rolling bevel
Paul Lueders -- 2/6/2009, 3:52 pm
Re:rolling bevel
Bill Hamm -- 2/8/2009, 12:36 am
Re:rolling bevel
Chris Sperry -- 2/6/2009, 3:10 pm
Re:rolling bevel *NM* *Pic*
Chris Sperry -- 2/6/2009, 10:07 am
Re:rolling bevel
Bill Hamm -- 2/6/2009, 1:13 pm
Re:rolling bevel
Chris Sperry -- 2/6/2009, 3:17 pm
Re: Material: Hardwood kayak?
Paul Lueders -- 2/5/2009, 6:23 pm
Re: Material: Hardwood kayak?
Bill Hamm -- 2/6/2009, 9:57 am
Re: Material: Hardwood kayak?
Paul Lueders -- 2/6/2009, 1:21 pm
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/5/2009, 1:19 pm
Re: Material: Hardwood kayak? *LINK*
Sam McFadden -- 2/5/2009, 12:28 pm
Re: Material: Hardwood kayak?
Bill Hamm -- 2/5/2009, 1:55 am
Re: Material: Hardwood kayak?
Rich K -- 2/5/2009, 12:34 am
Re: Material: Hardwood kayak?
Paul G. Jacobson -- 2/5/2009, 12:17 am
Re: Material: Hardwood kayak?
Brian Nystrom -- 2/5/2009, 7:41 am
Re: Material: Hardwood kayak?
Donovan -- 2/4/2009, 4:14 pm