Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fill coats *LINK*
By:Pedro Almeida
Date: 2/10/2009, 12:20 pm
In Response To: Epoxy: Fill coat application (currently too much foam) (Bohdan Szymanik)

Bohdan,

Check out this previous thread. I use a short bristle roller and I pre-promote my epoxy for quicker filling of the weave. If you can, read the whole thread.

Good luck and smooth building,

Pedro Almeida

http://www.kayakforum.com/cgi-bin/Building/index.cgi/read/166950

Messages In This Thread

Epoxy: Fill coat application (currently too much foam)
Bohdan Szymanik -- 2/9/2009, 3:17 pm
Re: Epoxy: Fill coat application (currently too mu
Bohdan Szymanik -- 2/10/2009, 4:58 pm
Re: Epoxy: Fill coat application (currently too mu
george jung -- 2/10/2009, 7:34 pm
Re: Epoxy: Fill coat application (currently too mu
Fred -- 2/10/2009, 1:26 pm
Re: Epoxy: Fill coat application (currently too mu
Rob Macks / Laughing Loon CC&K -- 2/11/2009, 9:00 am
Re: Epoxy: Fill coat application (currently too mu
Fred -- 2/11/2009, 12:26 pm
Re: Epoxy: Fill coat application (currently too mu
Rob Macks / Laughing Loon CC&K -- 2/11/2009, 12:51 pm
Re: Epoxy: Fill coats *LINK*
Pedro Almeida -- 2/10/2009, 12:20 pm
Re: Epoxy: Fill coats
Bohdan Szymanik -- 2/10/2009, 6:08 pm
Re: Epoxy: Fill coat application (currently too mu *LINK*
Rob Macks / Laughing Loon CC&K -- 2/10/2009, 10:45 am
Too much foam
Jay Babina -- 2/9/2009, 5:47 pm