Thanks. I'll give the ROS a whirl on the hull first. That'll be easier given the hull is convex & the deck is mostly concave. Hopefully I won't have to take it down to the wood. That may be more than I want to bite off.
Mike

: I agree with you Mike, that squirt boat DOES have potential. I believe your
: idea of sanding with your ROS is a good one, but do a test on a part of
: the boat that has the milky finish...see how deep it goes, because if it's
: only on the layers of fill epoxy, you may get away with only sanding off
: the milky part...however, if the defect is part of the wet out coat, then
: you may have to sand the old glass off and re glass...then varnish as
: usual...but by the looks of it, your work will be worth it!
: Cruz, W.F.