Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Paddle: kayak ferrule
By:John F Monroe
Date: 3/1/2009, 5:14 am
In Response To: Paddle: kayak ferrule (Scott Baxter)

: Have any of you had a kayak paddle that will not go together even when it is
: competely clean? I have two paddles that I have used for years that have
: develped that problem. They are mated to the correct other end. It seems
: to be the inner tube that is too large as the outer tube on both paddles
: will go on a 3rd identical paddle just fine. They are all glass shaft
: paddles.

Maybe you can just rinse them in water. My sailing masts is four pieces of aluminum sliding tubing that has an insertion of 18 inches into each other. I was having trouble with them binding. I tried to vacuum them out with a shop vac and that didn't work but simple rinsing them in water did the trick. Maybe squirt them good with a garden hose for extra cleaning pressure.

John

Messages In This Thread

Paddle: kayak ferrule
Scott Baxter -- 2/28/2009, 9:16 pm
Re: Paddle: kayak ferrule
johne -- 3/2/2009, 1:09 pm
Re: Paddle: kayak ferrule
Jay Babina -- 3/1/2009, 10:13 am
Re: Paddle: kayak ferrule
Scott Baxter -- 3/1/2009, 12:41 pm
Re: Paddle: kayak ferrule
John F Monroe -- 3/1/2009, 5:14 am
Re: Paddle: kayak ferrule
Bill Hamm -- 3/1/2009, 12:47 am