: I am close to putting the deck and hull together on a Guillemont double. I
: finished the minicell foam seats, hatch, cockpit coamings, etc., almost
: finished with the grab loops. Is there anything else I'm forgetting before
: I put the two halves together? I haven't installed the foot braces or made
: the bulkheads, thought I would wait and make sure they are in the right
: place. Thanks in advance!

You might want to make the bulkheads now, you can dry fit them to the hull and deck. You will need to fine tune them after the halves are together. I installed the studs that the foot peg rails mounted to before closing the clam. just easier than reaching in there afterwards

Tony