Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: using non-marine grade ply for hull
By:Bill Hamm
Date: 5/26/2009, 3:02 am
In Response To: Re: S&G: using non-marine grade ply for hull (Don Lucas)

: There is a 1/4" ply that is rated for use under sheet vinyl floors that
: is not to bad. I would say you must glass thin ply that is not the best.
: Don

Underlayment, is that ply and yes it's useable assuing you only need 1/4" ply. Only real problem is it tends to be fairly heavy.

Bill H.

Messages In This Thread

S&G: using non-marine grade ply for hull
uga_danny -- 5/21/2009, 5:07 pm
Re: S&G: using non-marine grade ply for hull
Don Lucas -- 5/25/2009, 11:06 am
Re: S&G: using non-marine grade ply for hull
Bill Hamm -- 5/26/2009, 3:02 am
Re: S&G: using non-marine grade ply for hull
Graham -- 5/30/2009, 6:35 am
Re: S&G: using non-marine grade ply for hull
JEM -- 6/2/2009, 3:00 pm
Re: S&G: using non-marine grade ply for hull
Bill Hamm -- 5/31/2009, 12:44 am
Re: S&G: using non-marine grade ply for hull
Henk -- 5/22/2009, 11:25 pm
Re: S&G: using non-marine grade ply for hull
Bill Hamm -- 5/22/2009, 6:14 pm
Re: S&G: using non-marine grade ply for hull
vk1nf -- 5/22/2009, 9:18 am
Re: S&G: using non-marine grade ply for hull
Kudzu -- 5/22/2009, 8:10 am
Re: S&G: using non-marine grade ply for hull
Robert N Pruden -- 5/22/2009, 10:18 am
Re: S&G: using non-marine grade ply for hull
Dave Reekie -- 5/22/2009, 5:15 am
Re: S&G: using non-marine grade ply for hull *LINK*
ogata -- 5/21/2009, 5:23 pm
Re: S&G: using non-marine grade ply for hull
Terry Haines -- 5/23/2009, 11:17 pm