Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

S&G: Using thicker ply for hull
By:uga_danny
Date: 5/26/2009, 4:13 pm

I'm about to order wood for my first kayak (Wood Duck 12) and due to the many underwater logs and stumps in my area, I was thinking about using thicker plywood. The plans call 4mm ply, but I am thinking about using 6mm. Is this a good idea and will 6mm ply bend as much as 4mm?
thanks

Messages In This Thread

S&G: Using thicker ply for hull
uga_danny -- 5/26/2009, 4:13 pm
Re: S&G: Using thicker ply for hull
Jerry S -- 5/28/2009, 2:24 pm
Re: S&G: Using thicker ply for hull
Henk -- 5/27/2009, 9:28 pm
Re: S&G: Using thicker ply for hull
Scott Fitzgerrell -- 5/27/2009, 9:26 pm
Re: S&G: Using thicker ply for hull
Mike Savage -- 5/27/2009, 6:08 am
Re: S&G: Using thicker ply for hull
Don Lucas -- 5/26/2009, 9:01 pm
Re: S&G: Using thicker ply for hull
Robert N Pruden -- 5/26/2009, 5:08 pm
Re: S&G: Using thicker ply for hull
Charlie -- 5/26/2009, 5:54 pm
Re: S&G: Using thicker ply for hull
Robert N Pruden -- 5/27/2009, 8:53 am
Re: S&G: Using thicker ply for hull
Charlie -- 5/26/2009, 4:45 pm