Date: 6/7/2009, 2:49 pm
I got it looking pretty good, with a few splotches, but nothing anyone will notice. Wood is cedar, stain is Solar Lux Medium Brown Mahogany. second pic taken with flash, but colors are pretty accurate in both pics. I had a few spots where some glue showed through, but I was able to quickly sand through and reapply stain pretty well to fix them.
Eric
: I use a rag to apply it. I get the rag good and wet with the stain and work
: very fast, and then plan on two coats. I have gone over the whole thing
: after with the Solar Lux Reducer which helped even things out well - your
: use of water probably did the same. I don't think water would work once
: the stain is truly dry.
Messages In This Thread
- Strip: sanding then staining with Solar Lux
eric -- 5/22/2009, 1:06 am- Re: Strip: sanding then staining with Solar Lux
Rob Macks / Laughing Loon CC&K -- 5/22/2009, 8:10 am- Re: Strip: sanding then staining with Solar Lux
eric -- 6/5/2009, 3:36 pm- Re: Strip: sanding then staining with Solar Lux
Nick Schade - Guillemot Kayaks -- 6/5/2009, 3:54 pm- Re: Strip: sanding then staining with Solar Lux *Pic*
eric -- 6/7/2009, 2:49 pm- Re: Strip: sanding then staining with Solar Lux
eric -- 6/7/2009, 2:51 pm
- Re: Strip: sanding then staining with Solar Lux
- Re: Strip: sanding then staining with Solar Lux *Pic*
- Re: Strip: sanding then staining with Solar Lux
- Re: Strip: sanding then staining with Solar Lux
Mike Bielski -- 5/22/2009, 7:36 am - Re: Strip: sanding then staining with Solar Lux
- Re: Strip: sanding then staining with Solar Lux