: Superb boat, indeed !

: Can you make photos of the take apart greenland paddle ? Did you build it
: yourself too ? It looks great !

Salut Franck! Yes, I made the paddle as I was waiting for bits and pieces to dry. Here's a close up and I just added another full length shot on the link below.

It's all WRC with mahogany tip and sides. It was actually a lot easier than I thought. Cutting it in half was hard! And sanding to a close to perfect cylinder for the CF ferule was a bit finicky but again, easier than I thought. I knew that I wanted a full length paddle and that I would alternate with my Werner depending on conditions and mood so it had to come apart for storage on deck.

I used the Chuck Holst Design. Blue Heron has the instructions posted along with a nice set of step by step pics for the laminated variety:

http://www.blueheronkayaks.com/kayak/paddle/article/makegreen.htm

Matt Johnson also has a nice little video on it:

http://www.carvegp.com/

Lots of other resources out there too. Friday Harbour Paddles make some gorgeous ones!:

http://www.fridayharborpaddles.com/