: I recently finished a new double and thought I would share it with those of
: you that are interested. First a little background on the design. About 5
: years ago I asked Hans Friedel to design a fast single that would be good
: in the windy/choppy waters of San Francisco Bay. He came up with a design
: that I call The Nordic Arrow. The kayak turned out to far exceed my
: expectations. I have raced it many times and have never had another sea
: kayak beat it and it usually beats many of the surf ski racers. It is a
: great design.
: I have been thinking that a double with the same design concepts would be a
: great boat. This past year I contacted Hans to see if he could work his
: design magic again. Hans is VERY busy and I feel fortunate that he made
: the time to design this boat. He sent me a print that I named the Double
: Arrow. I built the boat over the course of around 3.5 months. I decided to
: build it without staples (except for a few on the bottom). The hull is
: primarily Western Red Cedar, with some Sitka Spruce on the deck. There are
: some Australian Lacewood accents. I used 2 layers of 3.2oz satin glass on
: the exterior of the deck and hull. The inside was done with one layer with
: carbon fiber reinforcements. The kayak is 21.5'x23.5" and came out at
: 55lbs ready to paddle.
: As I built this boat I thought of all the little tips that came from this
: bulletin board . Rob Macks thoughts on building a light kayak, Vaclav
: Stejskal's carbon cockpit and rudder many of Nick's building ideas, etc. I
: have built quite a few boats over the years, but really value the great
: ideas that others have shared. Thanks.
: The Double Arrow has turned out well. My wife, Luanne and I got blue ribbons
: in a race this weekend. It was her first kayak race and we averaged 6.5mph
: over 7.8 miles. I think our speed will increase with a bit more training.
: I think Hans has done well with another excellent design.
: Ken
: ------WebKitFormBoundaryV3yCr8BwFm+Ctbwa
: ------WebKitFormBoundaryfA+1VHvwNQFJTaxO
Ken, wonderful to see your impeccable work again, and congrats on the blue ribbons! This is still on Salt Spring? Post some shots of the NA single some time, eh?
Regards from sunny Piedmont!
--Scott
Messages In This Thread
- Strip: New Fast Double Build *Pic*
Ken Katz- -- 7/1/2009, 1:03 pm- Re: Strip: New Fast Double Build
Scott Fitzgerrell -- 7/6/2009, 8:30 pm- Re: Strip: New Fast Double Build
Ken Katz-------WebKitFormBoundaryE7qaRkp6Z+FULuIs -- 7/6/2009, 11:23 pm
- Re: Strip: New Fast Double Build
Larry C. -- 7/2/2009, 7:29 pm- Re: Strip: New Fast Double Build
Ken Katz-------WebKitFormBoundaryE7qaRkp6Z+FULuIs -- 7/2/2009, 8:10 pm- Re: Strip: New Fast Double Build
Larry C. -- 7/3/2009, 4:01 pm- Re: Strip: New Fast Double Build
Ken Katz-------WebKitFormBoundaryE7qaRkp6Z+FULuIs -- 7/4/2009, 9:38 pm
- Re: Strip: New Fast Double Build
- Re: Strip: New Fast Double Build
- Re: Strip: New Fast Double Build------WebKitFormBo
Steve Taylor------WebKitFormBoundarybAWV+FWA93TvYQ -- 7/2/2009, 5:26 pm- Re: Strip: New Fast Double Build------WebKitFormBo
Larry C. -- 7/3/2009, 3:40 pm- Re: Strip: New Fast Double Build------WebKitFormBo
Steve Taylor------WebKitFormBoundarybAWV+FWA93TvYQ -- 7/4/2009, 7:07 pm
- Re: Strip: New Fast Double Build------WebKitFormBo
Ken Katz-------WebKitFormBoundaryE7qaRkp6Z+FULuIs -- 7/2/2009, 8:07 pm - Re: Strip: New Fast Double Build------WebKitFormBo
- Re: Strip: New Fast Double Build
Greg H- -- 7/1/2009, 1:30 pm- link to photos
Ken Katz- -- 7/1/2009, 1:05 pm- Epoxy seal coat
uga_danny -- 7/4/2009, 12:14 am- Re: Epoxy seal coat
ric -- 7/4/2009, 11:09 am- Re: Epoxy seal coat
Ken Katz-------WebKitFormBoundaryE7qaRkp6Z+FULuIs -- 7/4/2009, 9:32 pm- Re: Epoxy seal coat
Danny -- 7/5/2009, 10:06 pm
- Re: Epoxy seal coat
- Re: Epoxy seal coat
- Re: link to photos *LINK* *Pic*
franck -- 7/2/2009, 1:37 am - Re: Epoxy seal coat
- Re: Strip: New Fast Double Build
- Re: Strip: New Fast Double Build