: I need to rip some 8/4 white oak ... actual thickness is 1-3/4 inches and the
: length will be between 6 and 8 feet. I've never ripped hardwood that thick
: before so I dunno if my table saw has enough beans to do the job. Do ya
: think I can get away with it with my 1-1/2 HP belt drive contractors saw?

: Ken Blanton

It'll work fine, just won't be fast. A new rip blade (carbide is far better btw) will help alot. If you get binding on the blade it's easier to pull the board back a bit, shut off the saw and wedge the kerf with door shims to keep it open.

Bill H.