Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Glass sand through
By:Roger
Date: 8/21/2009, 10:45 am
In Response To: Re: Epoxy: Glass sand through (Roger Dalke)

Have now got the correct answer to my question. After paddling for the summer, the areas that were sanded through have lost all the varnish and the glass is exposed :( . It lookes awful and will require sanding down past the varnish and re-application of epoxy. So the short answer; If you sand through the epoxy to the glass, you MUST reapply epoxy. R

Messages In This Thread

Epoxy: Glass sand through
Roger Dalke -- 3/3/2009, 4:27 pm
Re: Epoxy: Glass sand through
Don Goss -- 3/4/2009, 7:55 am
Re: Epoxy: Glass sand through
Bill Hamm -- 3/4/2009, 12:30 am
Re: Epoxy: Glass sand through
Roger Dalke -- 3/4/2009, 12:45 am
Re: Epoxy: Glass sand through
Roger -- 8/21/2009, 10:45 am
Re: Epoxy: Glass sand through
Jay Babina -- 3/5/2009, 1:09 pm
Re: Epoxy: Glass sand through
Mike Savage -- 3/4/2009, 6:36 am