Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Which Glue
By:Brian Nystrom
Date: 8/27/2009, 7:36 am
In Response To: Re: Strip: Which Glue (JohnK)

: Hi Darren
: Aliphatic (yellow titebond 1) glue can soften in the heat and creep. I use
: polyurethane glue. Longer open time, doesn't creep, waterproof, but a pain
: if you use too much. It foams and stains the timber outside the joint as
: it reacts with the moisture in it. Use a syringe to put it in the cove.

When PU glue foams, it has no strength. It works best on very tight joints that are firmly clamped. Strip building is not an ideal application for PU glue.

Messages In This Thread

Strip: Which Glue
Darren -- 8/26/2009, 9:12 pm
Re: Strip: Which Glue
jeff mcgee -- 8/27/2009, 1:39 pm
Re: Strip: Which Glue
Darren -- 8/28/2009, 12:19 am
Re: Strip: Which Glue
Bill Hamm -- 8/28/2009, 6:35 am
Elmers is good too.
Jay Babina -- 8/27/2009, 8:07 am
Re: Elmers is good too.
Brad Tucker -- 8/28/2009, 11:55 am
Re: Elmers is good too.
Bob Beaullieu -- 8/28/2009, 8:51 am
Re: Strip: Which Glue
Fred -- 8/27/2009, 6:54 am
Re: Strip: Which Glue *LINK*
Phil Nelson -- 8/27/2009, 2:35 am
Re: Strip: Which Glue
JohnK -- 8/27/2009, 1:54 am
Re: Strip: Which Glue
Brian Nystrom -- 8/27/2009, 7:36 am
Re: Strip: Which Glue
JohnK -- 8/27/2009, 7:20 pm
Re: Strip: Which Glue
Brian Nystrom -- 8/27/2009, 7:48 pm
Re: Strip: Which Glue
JohnK -- 8/27/2009, 8:52 pm
Re: Strip: Which Glue
Fred -- 8/27/2009, 4:16 pm
Re: Strip: Which Glue
Allan -- 8/27/2009, 12:05 am
Re: Strip: Which Glue
Mac McCaskie -- 8/26/2009, 10:41 pm
Re: Strip: Which Glue
Bill Hamm -- 8/26/2009, 9:53 pm
Re: Strip: Which Glue
Gary Kvasnicka -- 8/26/2009, 9:43 pm
Re: Strip: Which Glue
Mark Grieve -- 8/27/2009, 9:38 pm
Re: Strip: Which Glue
Bill Hamm -- 8/28/2009, 6:32 am
Re: Strip: Which Glue
dsmithla -- 8/28/2009, 11:00 am