: Wondering if anyone has finished an Artic Hawk from CLC??
: I have been working on it for a long time. I finally decided to give up on
: the duct tape and drill holes and stitch it up. That is almost done.
: Now I wonder if someone would comment on some of the actual design features.
: Designer calls for a strip about 2 inches wided to be laid in the inside of
: the hull for strength. He then tells me to fill the area with thickened
: resin. Seems like that adds a lot of weight for what ever strenth it adds,
: it also seems that his idea of fillets tends toward the larger the better.
If it needs additional strength, I'd be inclined to lay the wood strip along the hull as directed, epoxying it in place, and then cover that with glass cloth. The idea is simple - it creates a 'sandwich', with the wood strip as the centre. Any sandwich construction gets stronger as you increase the separation of the two faces. Shouldn't madd a lot of weight, and it will stiffen the bottom considerably.
: Am I off the mark that some glass would be stronger and lighter than a large
: fillet?
: Just over thinking it again---which is why it still isn't finished.
: first build by the way and the instructions for this kit are nearly 400 pages
: in length, lots of pictures, like 4 to 5 per page. Hope I can get into the
: cockpit.
Messages In This Thread
- S&G: Anyone built and Artic Hawk kit from CLC
John Faas -- 9/27/2009, 5:55 pm- Re: S&G: Anyone built and Artic Hawk kit from CLC
William Cruz -- 10/1/2009, 9:45 pm- Re: S&G: Anyone built and Artic Hawk kit from CLC
Bris Paul -- 9/28/2009, 5:45 am- Re: S&G: Anyone built and Artic Hawk kit from CLC
Bill Hamm -- 9/28/2009, 12:23 am- Re: S&G: Anyone built and Artic Hawk kit from CLC
Duane Strosaker -- 9/28/2009, 12:01 am- Re: S&G: Anyone built and Artic Hawk kit from CLC
Wesley Ewell -- 9/27/2009, 7:39 pm- Re: S&G: Anyone built and Artic Hawk kit from CLC
george jung -- 9/27/2009, 10:32 pm
- Re: S&G: Anyone built and Artic Hawk kit from CLC
vk1nf -- 9/27/2009, 7:09 pm - Re: S&G: Anyone built and Artic Hawk kit from CLC
- Re: S&G: Anyone built and Artic Hawk kit from CLC